Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test IBM C2180-376. Cet outil de formation est convenable pour les candidats de test IBM C2180-376. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.
Pass4Test est un seul site de provider le guide d'étude IBM C2020-642 de qualité. Peut-être que vous voyiez aussi les Q&A IBM C2020-642 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A IBM C2020-642 comme votre guide d'étude.
Code d'Examen: C2180-376
Nom d'Examen: IBM (IBM WebSphere MQ V7.0, Solution Design)
Questions et réponses: 98 Q&As
Code d'Examen: C2020-642
Nom d'Examen: IBM (IBM Cognos 10 BI Scorecard Developer)
Questions et réponses: 75 Q&As
Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test IBM C2020-642, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
Le test IBM C2180-376 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test IBM C2180-376 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat IBM C2180-376 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test IBM C2180-376 avec l'aide de Pass4Test.
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification IBM C2020-642. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test IBM C2020-642. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.
C2180-376 Démo gratuit à télécharger: http://www.pass4test.fr/C2180-376.html
NO.1 The topic object for the topic x/y is defined with WILDCARD=PASSTHRU. Which of
the following is the
most appropriate use of a wildcard for this topic?
A. Subscribe to topic x/y/#
B. Publish the information to topic x/y/#
C. Publish the information to topic x/y/+
D. It is not possible to use a wildcard with this topic
Answer: A
certification IBM certification C2180-376 C2180-376 C2180-376 examen C2180-376 examen
NO.2 An organization has a widely distributed online environment, where applications are
connected via
WebSphere MQ messaging. A business requirement is brought forward that certain mission
critical
applications record audit trail data which is to be collected in a central location. No
information can be lost.
A central data warehouse must be loaded daily with this information as soon as possible after
end of
business. Which of the following proposed solutions is best in terms of the requirement,
reliability and
overall performance? The audit trail data is:
A. written to a file on the local file system and transmitted to the central audit trail server via
reliable file
transfer over WebSphere MQ.
B. sent as a persistent WebSphere MQ message and forwarded to the queue manager of the
central
server asynchronously.
C. inserted into a central database table via a remote access database client under control of
the local
WebSphere MQ transaction.
D. inserted into a local database table under two phase commit using WebSphere MQ as the
transaction
manager and a bulk update is performed at end of day.
Answer: B
IBM examen C2180-376 examen C2180-376 examen
NO.3 Which of the following should generally be avoided if an application is being designed
for optimal
efficiency?
A. Make messages nonpersistent if they do not need to be recoverable.
B. Code programs to open and close queues, or connect and disconnect from the queue
manager only
once, if the queues or connection will be used again.
C. Bundle the data to be transmitted into as few messages as possible (e.g., rather than
sending a
hundred 1MB messages, send one 100MB message).
D. Group a batch of messages within a unit of work where appropriate, so that they can be
committed all
at once (e.g., get and put messages under syncpoint and commit them in groups of 10, rather
than
committing them individually).
Answer: C
certification IBM certification C2180-376 C2180-376 examen certification C2180-376
NO.4 There are multiple instances of a cluster queue. Which of the following is
recommended practice for the
default binding (DEFBIND) parameter?
A. Allow the local WebSphere MQ administrators to define default binding as they think best
for each
instance of the queue.
B. Require the WebSphere MQ administrators to set default binding to the same value for all
instances of
the queue in the cluster.
C. The solution designer should consult with the development team and local WebSphere
MQ
administrator to determine how best to configure default binding of each queue manager.
D. The best option is to accept the default setting for default binding on each queue manager,
as it should
have been given the optimal setting by its WebSphere MQ administrator.
Answer: B
IBM examen C2180-376 examen C2180-376 examen certification C2180-376 C2180-376 examen
NO.5 A solution designer is evaluating distribution scenarios and wants to understand the
circumstances
where messages are not delivered as expected. Which of the following are reasons that a
message is
placed on the DLQ?
A. A trigger monitor is unable to start the triggered program
B. The destination queue is full when the program puts the message to the local queue
C. The queue manager is quiescing when the program puts the message to the queue
D. A sending message channel agent is unable to perform data conversion when required for
the
message
E. The program tries to put a message to an invalid local queue
Answer: A D
IBM examen C2180-376 certification C2180-376 C2180-376 examen
NO.6 An application creates documents in PDF format, which are subsequently transmitted
via WebSphere
MQ to a number of other servers in the network. Each server runs its own queue manager.
The
documents received by some servers are consistently corrupted, whereas on other servers
the
documents are intact. Other message traffic seems unaffected. What is the most likely
source of this
problem?
A. The environment variable MQCCSID specifies an incorrect value on the affected servers.
B. Incompatible message compression parameters are configured on the sending and
receiving channel
agents.
C. The network connection to the affected servers is unreliable and a message retry exit was
not specified
on the sending channel agent.
D. The affected servers run different CCSIDs from the servers creating the documents and
the message
descriptor specifies MQMD.Format as QSTR? causing message conversion.?QSTR?
causing message
conversion.
Answer: D
IBM examen certification C2180-376 certification C2180-376 C2180-376
NO.7 A solution developer is writing a C language application on a UNIX platform. There is
a requirement
for the transactions to be processed within syncpoint control. What is the MINIMUM required
MQ
component on the application platform to achieve this functionality?
A. WebSphere MQ Client Installation
B. WebSphere MQ Extended Transactional Client Installation
C. WebSphere MQ Server Installation
D. WebSphere MQ Server Installation with the XA capabilities configured
Answer: A
certification IBM certification C2180-376 certification C2180-376 C2180-376 examen
NO.8 A bus company is implementing a solution which will display in real-time the arrival
information of the
next bus on the bus stop sign. Each bus is sending information about its position at regular
intervals. What
is the best way of implementing this solution given that there is limited bandwidth for
communication? The
bus stop sign:
A. subscribes to messages published by the bus
B. queries a central system for bus position using SOAP over HTTP
C. replicates its own database every few minutes with a database stored on a central system
D. sends a message with a request every few minutes to a central system in order to query
bus position.
All replies are compressed.
Answer: A
IBM examen certification C2180-376 C2180-376 examen certification C2180-376
没有评论:
发表评论