Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Microsoft MB3-529, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
Pass4Test vous offre un choix meilleur pour faire votre préparation de test Microsoft 70-573-VB plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Microsoft 70-573-VB à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Microsoft 70-573-VB sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.
Pour vous laisser savoir mieux que la Q&A Microsoft 070-620 produit par Pass4Test est persuadante, le démo de Q&A Microsoft 070-620 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Microsoft 070-620 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.
Le test Microsoft 070-620 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.
Code d'Examen: MB3-529
Nom d'Examen: Microsoft (GP 10.0 Inventory and Order Processing)
Questions et réponses: 109 Q&As
Code d'Examen: 70-573-VB
Nom d'Examen: Microsoft (TS: Microsoft SharePoint 2010, Application Development)
Questions et réponses: 150 Q&As
Code d'Examen: 070-620
Nom d'Examen: Microsoft (Microsoft Windows Vista, Configuring)
Questions et réponses: 135 Q&As
Participer au test Microsoft 70-573-VB est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Microsoft 70-573-VB symbole bien la professionnalité d'un travailleur dans cette industrie.
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Microsoft MB3-529 à se preuver. Mais le taux du succès et bien bas. Participer le test Microsoft MB3-529 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
070-620 Démo gratuit à télécharger: http://www.pass4test.fr/070-620.html
NO.1 You perform an in-place upgrade on a Microsoft Windows XP Service Pack 2 (SP2) computer to
Windows Vista.
After the upgrade, you attempt to run a custom application. You receive the following error message: This
application is only designed to run on Windows XP or later.
You need to run the application on Windows Vista.
What should you do?
A. Modify the application properties to run in 256 colors.
B. Configure the application to run with elevated privileges.
C. Connect to Microsoft Updates and download any available updates.
D. Modify the application properties to run in Windows XP SP2 compatibility mode.
Answer: D
Microsoft examen 070-620 examen 070-620 examen 070-620
NO.2 You perform a clean installation of Microsoft Windows Vista on the first partition. Then, you install
Microsoft Windows XP Professional on the second partition of the same machine.
You are able to log on to Windows XP Professional but do not have the option to boot to Windows Vista.
You need to be able to dual boot the computer.
What should you do?
A. Run the bootcfg.exe application with the /fastdetect option.
B. Perform a clean installation of Windows Vista on the first partition.
C. Run the msconfig.exe application and change the order of the operating systems in the boot.ini file.
D. Edit the boot.ini file. Add the following line:
Multi(0)Disk(0)Rdisk(0)Partition(1)\Microsoft Windows
Answer: B
Microsoft examen certification 070-620 certification 070-620
NO.3 You attempt to upgrade a Microsoft Windows XP computer to Windows Vista.
You receive an error message during the upgrade process indicating that the upgrade has failed.
You need to view the details of the error message.
What should you do?
A. From the Windows Recovery Environment (WinRE), run diskpart.exe.
B. From the Windows Recovery Environment (WinRE), review the Boot.ini file.
C. From the Windows Recovery Environment (WinRE), examine the contents of the \Windows\Panther
folder.
D. Start the computer from the Windows XP installation media and select the Repair option.
Answer: C
Microsoft examen 070-620 examen 070-620 070-620 examen
NO.4 0
128 megabytes (MB) of dedicated video memory
You want to install Windows Vista on your computer by using the retail installation media. You also want to
enable Windows Aero.
You need to ensure that your computer hardware supports the planned installation.
What should you do?
A. Install a network card.
B. Install a DVD-ROM drive.
C. Replace the hard disk drive.
D. Replace the graphics adapter.
Answer: B
certification Microsoft certification 070-620 070-620
2.You need to configure a new computer to dual-boot to the following operating systems:
Microsoft Windows XP Professional
Microsoft Windows Vista
Which two procedures should you perform? (Each correct answer presents a complete solution. Choose
two.)
A. Create two partitions. Install Windows XP Professional on the first partition. Boot the computer from the
Windows Vista DVD-ROM. Install Windows Vista on the second partition.
B. Create two partitions. Install Windows Vista on the first partition. Boot from the Windows XP
Professional installation CD-ROM. Install Windows XP Professional on the second partition.
C. Create one partition. Install Windows XP Professional on the partition. From Windows XP Professional
launch the Windows Vista setup utility. Install Windows Vista in the same partition.
D. Create two partitions. Install Windows XP Professional on the first partition. From Windows XP
Professional launch the Windows Vista setup utility. Install Windows Vista on the second partition.
Answer: A AND D
Microsoft examen 070-620 examen certification 070-620
NO.5 You have a computer that runs Microsoft Windows XP. The computer has a custom application installed.
You plan to upgrade the Windows XP computer to Windows Vista.
You need to identify whether User Account Control (UAC) will allow the custom application to run without
requiring elevated privileges.
What should you do?
A. Insert the Windows Vista installation media and run mighost.exe.
B. Insert the Windows Vista installation media and run setup.exe /unattended:unattend.xml.
C. Install Microsoft Application Compatibility Toolkit 5.0 and run the Setup Analysis Tool.
D. Install Microsoft Application Compatibility Toolkit 5.0 and run the Standard User Analyzer.
Answer: D
certification Microsoft 070-620 examen certification 070-620 certification 070-620
NO.6 You have a computer that runs Microsoft Windows XP. Your computer has the following hardware
installed:
CD-ROM drive
1024 megabytes (MB) of RAM
120 gigabytes (GB) hard disk drive that has 30 GB of free space
DirectX 9 class graphics adapter that supports Windows Display Driver Model (WDDM) and Pixel Shader
NO.7 Your computer runs Microsoft Windows 2000 with Service Pack 3.
You need to upgrade your computer to Microsoft Windows Vista. You must achieve this goal without
reinstalling the applications.
What should you do?
A.First upgrade the computer to Microsoft Windows XP Professional, and then upgrade to Windows Vista.
B. Install Microsoft Windows 2000 Professional Service Pack 4 on the computer. Start a Windows Vista
upgrade from an installation DVD.
C. Install Windows Vista into a separate partition. Use the Windows Easy Transfer wizard to upgrade your
settings to the Windows Vista operating system.
D. Copy your user profile to a removable media. Perform a clean installation of Windows Vista. Copy your
user profile to the C:\Users directory.
Answer: A
Microsoft examen 070-620 examen certification 070-620 070-620 070-620 examen
NO.8 Your computer runs Microsoft Windows Vista Home Basic edition.
When you attempt to upgrade your computer to Microsoft Windows Vista Ultimate edition by booting from
the DVD-ROM, you receive the following warning message:
"The partition you selected might contain files from a previous Microsoft Windows installation. If it does,
these files and folders will be moved to a folder named Microsoft Windows.old. You will be able to access
the information in Microsoft Windows.old, but you will not be able to use your previous version of Microsoft
Windows."
You need to complete the upgrade.
What should you do?
A. Boot into safe mode. Launch the setup.exe application from the Windows Vista Ultimate edition
DVD-ROM.
B. Boot from the Windows Vista Ultimate edition DVD-ROM and click the command prompt option. Use
the diskpart utility to create a new primary partition for the Windows Vista Ultimate edition installation.
C. Log on to the Windows Vista Home Basic edition installation. Launch the setup.exe application from
the Windows Vista Ultimate edition DVD-ROM, and then click the Custom (Advanced) option.
D. Log on to the Windows Vista Home Basic edition installation. Launch the setup.exe application from
the Windows Vista Ultimate edition DVD-ROM, and then click the Upgrade option.
Answer: D
Microsoft examen 070-620 examen 070-620 certification 070-620
没有评论:
发表评论