Le test Aruba AWMP ACMP_6.1 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Aruba AWMP ACMP_6.1 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Aruba AWMP ACMP_6.1.
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
L'importance de la position de Certificat Aruba AWMP ACMP_6.1 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Aruba AWMP ACMP_6.1 par votre première fois.
Code d'Examen: AWMP
Nom d'Examen: Aruba (Aruba Wireless Mesh Professional 4.2)
Questions et réponses: 103 Q&As
Code d'Examen: ACMP_6.1
Nom d'Examen: Aruba (Aruba Certified Mobility Professional 6.1)
Questions et réponses: 180 Q&As
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
AWMP Démo gratuit à télécharger: http://www.pass4test.fr/AWMP.html
NO.1 In an Aruba mesh design which mesh scenarios are valid?
A. Point-to-point
B. Point-to-multipoint (hub and spoke)
C. Point-to-point-to-point (linear)
D. Full mesh (redundant links)
E. All of the above
Answer: E
certification Aruba AWMP AWMP examen AWMP examen AWMP AWMP examen
NO.2 In RF mathematics, 1 Watt of power equals what measurement of dBm?
A. 1
B. 10
C. 20
D. 30
E. 100
Answer: D
certification Aruba certification AWMP AWMP examen AWMP examen certification AWMP AWMP
NO.3 What is the maximum percentage obstruction of the first Fresnel zone in a point to point link?
A. 35%
B. 40%
C. 50%
D. 60%
Answer: B
Aruba AWMP examen AWMP AWMP examen
NO.4 Consider a radio configured for 20dBm conducted power connected to a 3dbi antenna.
What is the resulting EIRP in mW?
A. 100 mW
B. 200 mW
C. 150 mW
D. 250 mW
Answer: B
Aruba AWMP examen AWMP AWMP examen AWMP examen
NO.5 What limit does receiver sensitivity describe?
A. the maximum RSSI to decode a packet at a specific data rate
B. the minimum RSSI to decode a packet at a specific data rate
C. the receive signal level strength, which is always the same for each rate
D. the maximum output transmit power for receivers that are in range
E. the maximum RSSI to decode a packet at a specific data rate (5 - 45.45%)
Answer: B
Aruba certification AWMP AWMP AWMP
NO.6 Which statement is most correct and should be considered in a typical handheld client Wi-Fi access
mesh design?
A. The upstream and downstream link budgets between clients and mesh routers are symmetrical.
B. Client devices typically broadcast at higher EIRP than mesh routers.
C. Client EIRP and receive sensitivity is generally the limiting factor for range.
D. Mesh backhaul links and client access should all be on the same channel to maximize connectivity.
Answer: C
Aruba AWMP AWMP examen certification AWMP
NO.7 Which of the following statements is the best answer regarding lightning arrestors?
A. when installing where lightning is common
B. when installing where power surges are common
C. always, because the outdoor environment is unpredictable
D. whenever the appropriate regulatory agency requires them
Answer: C
Aruba certification AWMP certification AWMP
NO.8 Which technical specifications of the antenna should be considered during selection of an antenna?
A. Frequency range
B. Supported data rates and modulation technologies
C. Polarization
D. Gain
E. Encryption modes
Answer: A,C,D
certification Aruba AWMP examen AWMP
NO.9 Which statement about Equivalent Isotropically Radiated Power (EIRP) is true?
A. EIRP is the path loss from the transmitter to the receiver in dB
B. EIRP is equal to ((transmit power + antenna gain) - connector and cable loss)
C. EIRP is not important because local regulations do not limit transmit power
D. EIRP is measured in relation to a spherical isotropic radiator
Answer: B
Aruba AWMP examen AWMP certification AWMP AWMP examen
NO.10 A radio with 100 mW of TX power is connected through a 50-foot cable with 3 dB of loss to an antenna
with 10 dBi of gain. What is the EIRP in mW?
A. 100 mW
B. 250 mW
C. 500 mW
D. 1 W
Answer: C
Aruba AWMP AWMP AWMP examen certification AWMP
NO.11 What are the recommended deployment scenarios for MST200.?
A. Part of a point to point link
B. Providing access to mobile clients
C. As a core node in a large mesh
D. As an edge node in a mesh
Answer: A,D
Aruba AWMP certification AWMP certification AWMP certification AWMP AWMP examen
NO.12 What effect on RSSI does antenna polarization of the receiver cause?
A. an increase in RSSI when polarized the same as the transmitter
B. an increase in RSSI when polarized exactly opposite from the transmitter
C. no affect to the signal, if the antenna beamwidth are properly aligned.
D. no effect if the deployment is within 30 degrees latitude of the equator
Answer: A
Aruba examen AWMP examen AWMP AWMP examen AWMP
NO.13 When RSSI is increased by 6 dB, how many times approximately does the signal strength increase by?
A. 1 time
B. 2 times
C. 8 times
D. 4 times
Answer: D
Aruba AWMP AWMP
NO.14 What is the Aruba recommended mounting arrangement for a pair of identical omnidirectional antennas
in an outdoor deployment using 802.11n?
A. Over and under
B. One horizontal and one vertical
C. Any arrangement that separates the antennas by 45 degrees
D. Install the two antennas far apart
Answer: A
Aruba AWMP AWMP AWMP examen AWMP
NO.15 Which of these statements is correct in regards to Fresnel zone and mesh network design? Choose all
that apply.
A. Mesh network design does not need to account for Fresnel zone.
B. Fresnel zone clearance of at least 60% is required for mesh radio links.
C. Fresnel zone only comes into play when designing Wi-Fi client coverage.
D. Fresnel zone, Free Space Path Loss, EIRP and receive sensitivity are all factors that should be
considered.
Answer: B,D
certification Aruba certification AWMP AWMP examen AWMP examen AWMP
没有评论:
发表评论