Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
On doit faire un bon choix pour passer le test HP HP0-Y35. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification HP HP0-Y35 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
Vous allez choisir Pass4Test après essayer une partie de Q&A HP HP0-Y35 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification HP HP0-Y35.
Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.
Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification HP HP0-Y35, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.
Code d'Examen: HP0-Y35
Nom d'Examen: HP (Wireless Networks - ASE 2011 Delta Exam)
Questions et réponses: 75 Q&As
HP0-Y35 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y35.html
NO.1 Click the Exhibit button.
A network administrator is managing an HP A-Series Wireless Access Controller at the command
line interface (CLI). The administrator issues a command to view the contents of the controller
flash directory. Looking at the output, which access point models can the controller boot and
command to view the contents of the controller? flash directory. Looking at the output, which
access point models can the controller boot and manage? (Select two.)
A. HP WA2220-AG
B. HP WA2612-AGN
C. HP WA2620-AGN
D. HP WA2610E-AGN
E. HP WA2620E-AGN
Answer: B,C
HP HP0-Y35 examen HP0-Y35 HP0-Y35 certification HP0-Y35
NO.2 Click the Exhibit button.
You have recently upgraded the Comware of an HP A-Series Access Controller (AC). Prior to
rebooting the device, you issued the dir command to display the contents of the flash root
directory. Upon reboot, the AC does not successfully run the new version of firmware. What is the issue?
A. The device does not have enough memory to run the new firmware.
B. The filename of the firmware is incorrect.
C. The new firmware is not present in the root directory.
D. Thebootware of the device requires updating as well.
Answer: B
HP certification HP0-Y35 certification HP0-Y35 HP0-Y35 examen certification HP0-Y35
NO.3 Click the Exhibit button.
When IRF with Distributed Link Aggregation is implemented at all layers of a LAN (Core,
Aggregation, and Access), which protocols can be replaced by IRF functions? (Select two.)
A. MSTP
B. LACP
C. BFD
D. NSF/GR
E. VRRP
Answer: A,E
certification HP HP0-Y35 certification HP0-Y35
NO.4 Which protocols/technologies can be used to implement IRF MAD? (Select two.)
A. NSF/GR
B. ICMP
C. IGMP
D. BFD
E. LACP
Answer: D,E
certification HP certification HP0-Y35 certification HP0-Y35 HP0-Y35 HP0-Y35
NO.5 Which roles are supported by the sFlow standard?
A. agent and collector only
B. probe and collector only
C. agent, collector, and analyzer
D. probe, collector, and analyzer
Answer: A
HP HP0-Y35 examen HP0-Y35 examen HP0-Y35 HP0-Y35
NO.6 Click the Exhibit button.
An IRF-stack is being built using HP A5800 switches, and IRF member 1 will be connected to IRF
member 2 using IRF-port 2. Which IRF-port should it be connected to?
A. 1
B. 2
C. 3
D. any
Answer: A
certification HP certification HP0-Y35 HP0-Y35 examen HP0-Y35
NO.7 You have been asked to deploy an additional HP A-Series wireless access point in the conference room
of an advertising agency. You connect to the CLI of the access controller and create an AP management
template. In which view do you specify the serial number of the access point?
A. Radio view
B. Service Template view
C. AP view
D. ESS Interface view
Answer: C
HP examen HP0-Y35 HP0-Y35 examen HP0-Y35 HP0-Y35 certification HP0-Y35
NO.8 What are acceptable topologies for an IRF-Stack? (Select two.)
A. star
B. tree
C. daisy-chain
D. mesh
E. ring
Answer: C,E
certification HP certification HP0-Y35 HP0-Y35
NO.9 Given an HP A5800 switch that is in its factory default configuration, what happens after the
following command sequence? (Note: There is no save command.) system-view irf member 1
renumber 2 quit reboot
A. The IRF member ID will be 1.
B. The IRF member ID will be 2.
C. The IRF member ID will be assigned dynamically.
D. The IRF member ID will be "unknown."
Answer: B
HP HP0-Y35 HP0-Y35
NO.10 Using HP A5800 switches, which element must be configured in all switches involved in Layer 2
remote port mirroring?
A. remote-mirroring group
B. mirroring-ingress port
C. monitor-egress port
D. remote-probe VLAN
Answer: D
HP HP0-Y35 certification HP0-Y35 certification HP0-Y35
NO.11 After a MAD enabled IRF-stack splits, what happens to the part of the stack that entered Recovery
state?
A. All ports, except for the IRF-ports, BFD enabled ports, and console ports are shut down.
B. All ports, except for the IRF-ports, LACP enabled Link aggregation groups, console ports, and
manually excluded ports are shut down.
C. All ports, except for the IRF-ports, console ports, and manually excluded ports, are shut down.
D. All ports except for manually excluded ports are shut down.
Answer: C
certification HP certification HP0-Y35 HP0-Y35 HP0-Y35 certification HP0-Y35
NO.12 Which sampling mechanisms are available in sFlow in A-Series switches and routers? (Select
two.)
A. packet-based
B. packet-length-based
C. time-based
D. ip-protocol-based
E. ip-source-address-based
F. mac-address-based
Answer: A,C
HP HP0-Y35 HP0-Y35 examen certification HP0-Y35
NO.13 You have been asked to deploy a guest wireless service within an A-Series solution in the
reception area of a marketing firm. The clients associated with the guest service should be
assigned to VLAN 10. In which view do you assign the VLAN to the wireless service?
A. System view
B. Service Template view
C. VLAN Interface view
D. ESS Interface view
Answer: D
HP HP0-Y35 HP0-Y35 HP0-Y35 examen
NO.14 In an IRF stack, which operational plane is centralized (in the Master) and which is distributed
(among all members)?
A. Management: centralized
Control: centralized
Forwarding: centralized
B. Management: distributed
Control: distributed
Forwarding: distributed
C. Management: centralized
Control: distributed
Forwarding: distributed
D. Management: distributed
Control: centralized
Forwarding: distributed
E. Management: centralized
Control: centralized
Forwarding: distributed
Answer: E
HP HP0-Y35 HP0-Y35 examen HP0-Y35 HP0-Y35
NO.15 Click the Exhibit button.
You have been asked to configure the switching engine of an HP A3000-24G PoE+ Wireless
Switch. First, you log in to the CLI of the access controller and then move to the System view. You
then attempt to issue the partial command oap co and use the Tab key to complete it. However,
the CLI does not complete the command but issues a line return instead, as shown in the exhibit.
What must you do to connect to the CLI of the switching engine?
A. Return to the User view and then issue the command.
B. Enter the OAP view and then issue the command.
C. Use the CTRL+K key combination to access the CLI of the switching engine.
D. Telnet directly to the IPaddress of the switching engine and issue the command.
Answer: A
HP certification HP0-Y35 HP0-Y35 HP0-Y35
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification HP HP0-Y35, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification HP HP0-Y35. Peut-être d'obtenir le Certificat HP HP0-Y35 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
没有评论:
发表评论