Le test Certification Novell 50-682 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Novell 50-682. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Novell 50-682.
La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Novell 50-682.
Code d'Examen: 50-682
Nom d'Examen: Novell (Advanced Novell Network Management )
Questions et réponses: 145 Q&As
Si vous vous inscriez le test Novell 50-682, vous devez choisir une bonne Q&A. Le test Novell 50-682 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
Avec l'aide du Pass4Test, vous allez passer le test de Certification Novell 50-682 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Novell 50-682, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.
Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Novell 50-682, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Novell 50-682 coûtant un peu d'argent.
50-682 Démo gratuit à télécharger: http://www.pass4test.fr/50-682.html
NO.1 .There are problems when starting your NetWare 6 server.
Which command helps to identify at which point modules are loading during the server
startup?
A. LIST
B. CONFIG
C. STARTUP
D. MODULES
E. LIST STAGE
Answer: E
Novell 50-682 examen 50-682 50-682
NO.2 .When does synthetic time occur in an eDirectory tree?
A. When there is no time source in the tree.
B. When a secondary server acts like a time source.
C. When time is not synchronized throughout the network.
D. When an object is modified within the same second from two different sources.
E. When an eDirectory object has a modification time stamp in the future of the current
network time.
Answer: E
certification Novell 50-682 examen certification 50-682
NO.3 .Which utility allows you to type in commands at the server console screen?
A. iMonitor
B. iManager
C. ConsoleOne
D. Server Manager
E. Remote Manager
Answer: E
Novell examen 50-682 50-682 examen 50-682 examen
NO.4 .Which statements are true about the source server when doing a server migration to
NetWare 6? (Choose two)
A. The source server must be running IP.
B. Any NetWare 3.x server and higher can be migrated to NetWare 6.
C. The source server's volumes must be the same size as the destination server's volumes.
D. If the source server is NetWare 4, the volumes must have long name space support
added.
E. The person performing the migration must have the Supervisor right to the source
server's file system.
Answer: D, E
Novell 50-682 50-682
NO.5 Click on the object that will allow you to view start, failover, and failback node
settings.
Answer:
NO.6 Which RAID levels can be implemented with NSS? (Choose two)
A. 0
B. 1
C. 2
D. 3
E. 4
F. 5
G. 6
H. 7
Answer: A,B
certification Novell 50-682 examen 50-682 examen 50-682
NO.7 .You want to modify your NCS environment by changing node assignment to
resource using ConsoleOne.
Which object's properties page allows you to change node assignments?
A. Any node object
B. The cluster object
C. The master node object
D. The Cluster ADMIN object
E. Any cluster-enabled resource or volume object
Answer: B
Novell 50-682 examen certification 50-682 50-682 50-682 certification 50-682
NO.8 Which is a useful troubleshooting step if a server is not communicating?
A. Verify that cache buffers are over 20%.
B. Verify that the server is not out of packet receive buffers.
C. Verify that the DOS=HIGH command is not in CONFIG.SYS.
D. Remove memory managers from loading in AUTOEXEC.NCF.
Answer: B
Novell examen 50-682 certification 50-682
NO.9 .Click on the object that will allow you to specify the amount of time to wait for
nodes to join the cluster.
Answer:
NO.10 When checking the state of a cluster resource, what color will the resource appear as, if it
is unknown?
A. Red
B. Gray
C. Green
D. Yellow
E. Blank (or no color)
Answer: B
Novell 50-682 50-682 50-682 examen certification 50-682
NO.11 .Shown are properties of the DACLUSTER object. There are applications in the
cluster that you want to load before others.
Click on the tab that will allow you to specify the order that applications load within
the cluster.
Answer:
NO.12 .DRAG DROP
Listed are the SET parameters used that instruct the server how to respond to an
abend and the description for each SET parameter.
Drag the parameter to the appropriate description.
Answer:
NO.13 You just added a second hard drive to your RAID system. Click the area of the graphic
that redistributes data across all RAID devices, including the new hard drive.
Answer:
Explanation: Click on Restripe
page 6-9 Restriping redistributes data across all Raid devices, including the new hard
drive.
NO.14 .Which tool is used to fix problems with an NSS pool that could not be corrected with
other techniques?
A. VCU
B. VERIFY
C. REPAIR
D. REBUILD
E. NSSSCAN
F. POOLREPAIR
Answer: D
Novell examen 50-682 50-682
NO.15 Using the UAL licensing model, where is it recommended to install user license if the
server object resides in the FLIGHTOPS.DEL.DIGITALAIR container and the user
objects reside in the CUSTSERV.DEL.DIGITALAIR container?
A. In any container.
B. In the Security container.
C. In the DIGITALAIR container.
D. In the CUSTSERV.DEL.DIGITALAIR container.
E. In the CUSTSERV.DEL.DIGITALAIR or DEL.DIGITALAIR containers.
F. In the FLIGHTOPS.DEL.DIGITALAIR or DEL.DIGITALAIR containers.
Answer: E
certification Novell certification 50-682 50-682 50-682 50-682
NO.16 .You are working in a pure IP environment and the workstation is not
communicating with the server.
Which are some valid troubleshooting steps that can be executed on the workstation to
help identify the problem? (Choose three)
A. Ping the server.
B. Use TRACERT.
C. Verify that DSTRACE is not running.
D. Use CONFIG to verify that the network board is bound.
E. Verify the workstation IP address with the IPCONFIG command.
F. RUN DSTRACE to verify there are no DS communication issues between the
workstation and server.
Answer: A, B, E
certification Novell certification 50-682 certification 50-682 50-682 certification 50-682
NO.17 Which are tools you can use at the server console prompt to help troubleshoot IP
problems? (Choose two)
A. PING
B. TCPCON
C. NETSTAT
D. TRACERT
E. IPCONFIG
Answer: A, B
certification Novell 50-682 50-682 examen 50-682
NO.18 In a NCS environment, a resource state of ALERT has been placed on a resource.
What is a reason that a resource would be in an ALERT state?
A. The resource is shut down or in an inactive state.
B. The resource is unloading from the server it was running on.
C. The resource is not running and requires administrator intervention.
D. There isn't an assigned node up that the resource can be loaded on.
E. The Start, Failover, or Failback mode for the resource has been set to manual.
Answer: E
Novell 50-682 examen 50-682 examen
NO.19 Which abend is almost always memory related?
A. Page fault
B. Invalid Opcode
C. Non Maskable Interrupt
D. General Protection Processor Exception
E. Ate Poison Pill in SbdWriteNode Tick given by some other node.
Answer: C
Novell 50-682 certification 50-682 50-682
NO.20 .You have just completed installing NCS and are now going to create a shared disk
partition.
Which utility is used to create a shared disk partition?
A. iMonitor
B. iManager
C. ConsoleOne
D. Server Manager
E. NWCONFIG.NLM
Answer: C
Novell 50-682 50-682 50-682
NO.21 .In order to change the IP address of your NetWare iFolder server, which files must be
manually modified? (Choose four)
A. HTTPD.CONF
B. iFolderClient.exe
C. AUTOEXEC.NCF
D. STOPIFOLDER.NCF
E. STARTIFOLDER.NCF
F. HTTPD_ADDITIONS_MW.CONF
Answer: A, B, C, F
Novell 50-682 examen 50-682 examen 50-682 examen 50-682
NO.22 .When performing a migration to a NetWare 6 server, which are valid statements
regarding copying volumes? (Choose two)
A. The volumes cannot be compressed.
B. The source and destination server's volumes must be NSS.
C. You do not need to copy all of the volumes at the same time.
D. The source and destination server's volume size must be the same.
E. The source and destination server's volume names must be the same.
Answer: C, E
certification Novell 50-682 50-682 examen 50-682
NO.23 .When NCS casts off an isolated slave node, the slave node takes a poison pill and
abends.
Which statement is true regarding the poison pill?
A. The master node sends a poison pill directly to the isolated node.
B. Any of the non-isolated nodes send a poison pill directly to the isolated node.
C. The isolated node recognizes it is not receiving heartbeats from the master node and
then takes the poison pill.
D. The isolated node realizes that its epoch number does not match the other nodes epoch
number and then takes the poison pill.
E. The isolated node reads a special token on the SBD partition that was created by the
other nodes and then takes the poison pill.
Answer: E
certification Novell 50-682 certification 50-682
NO.24 .You have setup load and unload scripts for resource in your NCS environment and
have specified a timeout value of 300 seconds for each resource.
What will happen to the resource if it doesn't get through the load script in 300 seconds?
A. It is put into an ALERT state.
B. It is put into an OFFLINE state.
C. It is put into a COMATOSE state.
D. It is put into an UNASSIGNED state.
E. It is put into a QUORUM WAIT state.
Answer: C
Novell certification 50-682 50-682 examen
NO.25 .An iFolder user has discovered that new files are not being synchronized to his
server, while at the same time changes to existing files are being synchronized.
What is the most likely cause of the problem?
A. The conflict bin is too small.
B. Corrupted file maps are dirmaps.
C. The computer does not have sync rights.
D. The server does not have enough disk space.
Answer: B
Novell examen 50-682 50-682 50-682 examen 50-682
NO.26 .Which preconfigured report searched the entire tree, communicates with every NetWare
server it finds, and reports errors?
A. Agent Health
B. Obituary Listing
C. Object Statistics
D. Server Information
E. Service Advertising
Answer: D
Novell certification 50-682 50-682 50-682
NO.27 .If an object is missing a mandatory attribute, how will this object be displayed in
ConsoleOne?
A. As a grayed-out object.
B. As a black-and-white object.
C. As a mark in a circle.
D. As a mar in a square.
E. As two numbers with a dash between them (eg. 9-6).
Answer: C
Novell certification 50-682 50-682 50-682 examen
NO.28 .What happens during the Finish eDirectory Migration stage of a server migration to
NetWare 6 process? (Choose two)
A. The NICI files are copied.
B. The licenses are installed.
C. The volume objects are updated.
D. The destination server is restarted.
E. The file trustee assignment are restored.
Answer: C, E
Novell examen certification 50-682 50-682 examen
NO.29 .What are cluster-aware applications for NCS 1.6? (Choose two)
A. iManager
B. ManageWise
C. DHCP Server
D. RealOne player
E. Queue-based printing
Answer: A, C
Novell certification 50-682 50-682
NO.30 After a NetWare 6 server migration, you have noticed that device drivers are not
loading. These drivers need to be placed in the directory where SERVER.EXE
resides.
Where can you copy these drivers from?
A. C:\DRIVERS
B. SYS:SYSTEM
C. STS:ETC\DRIVERS
D. SYS:SYSTEM\DRIVERS
E. C:\NWSERVER\DRIVERS
Answer: E
Novell 50-682 examen 50-682 examen 50-682
Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Novell 50-682. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.
没有评论:
发表评论