Le test Certificat Avaya 3605 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Avaya 3605. Vous allez prendre toutes essences du test Avaya 3605 dans une courte terme.
Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.
Code d'Examen: 3605
Nom d'Examen: Avaya (Avaya Ethernet Routing Switch Implementation and Maintenance Exam)
Questions et réponses: 173 Q&As
Vous pouvez tout d'abord télécharger le démo Avaya 3605 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.
Vous aurez une assurance 100% à réussir le test Avaya 3605 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
L'équipe de Pass4Test rehcerche la Q&A de test certification Avaya 3605 en visant le test Avaya 3605. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Avaya 3605 sans aucune doute.
3605 Démo gratuit à télécharger: http://www.pass4test.fr/3605.html
NO.1 What does the trace level 9 3 command accomplish?
A. It captures BGP events at a terse level.
B. It captures packets copied to the CPU at a verbose level.
C. It shows CPU utilization.
D. It captures RCC IP events at verbose level.
Answer: B
Avaya certification 3605 certification 3605 3605
NO.2 When configuring a new Ethernet Routing Switch (ERS) 8000 using the default interface, the
attempt to load an ACLI configuration fails because the default interface is the CLI. How is the ACLI
interface obtained?
A. Change the interface type in the config.cfg file.
B. Change the ACLI boot flag and save the boot configuration file.
C. Exit the CLI and choose ACLI at the interface manager prompt.
D. Use the abort command and enter 'no' at the default interface.
Answer: C
Avaya 3605 examen 3605
NO.3 By default the ERS 8000 is configured for warm standby. After installation of a new ERS
solution with dual CPUs, which three actions need to be Perform on the ERS configuration to ensure
high availability mode is enabled and will function correctly? (Choose three)
A. Set the high availability CPU boot flag to true.
B. Set the warm standby CPU hoot flag to false. C. Set the save to standby CPU boot flag to true.
D. Save the boot.cfg conflg file and reset the switch to activate the changes.
E. Install the high availability license file.
Answer: A,D,E
Avaya 3605 3605 certification 3605 certification 3605
NO.4 The attempt to manage an Ethernet Routing Switch (ERS) 8000 using a Virtual Route
Redundancy Protocol (VRRP) address was not successful. What is causing this problem?
A. The virtual router identifier is 0.
B. The data center interface is set as a critical IP interface.
C. A real IP address is required for management access not a VRRP address.
D. The virtual router identifier is configured for the VRRP IP address owner.
Answer: C
Avaya 3605 examen certification 3605 3605 examen
NO.5 The SNMP counters check for authorization failures and other types error conditions. Which of
these SNMP error conditions is displayed in Enterprise Device Manager?
A. PCAP packet capture counters
B. In Bad Community Names counters
C. Fan Failure packet counters
D. Power Supply Failure packet counters
Answer: D
Avaya 3605 certification 3605 3605 3605
NO.6 Traceroute allows a route to be traced to a network using an Ethernet Routing Switch (ERS)
8600 CLI command. How could you use it to limit the number of hops the traceroute reports?
A. Configure the -P (base UDP port) to the number of maximum number hops.
B. Configure the -q (number of probes per TTL) to the number maximum number of hops.
C. Configure the -m (maximum TTL value) to the number of maximum number of hops.
D. Configure the -w (wait time per probe) to the number of maximum number of hops.
Answer: C
Avaya examen 3605 examen 3605 3605 3605 3605
NO.7 A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in the
existing Ethernet Routing Switch (ERS) 8600-based core. The technician has to configure VRF on the
ERS 8600. Which statement represents the order for configuring a new VRF?
A. Creating a new VLAN, add an IP address to the VLAN, create the VRF in the VLAN configuration.
B. Create VRF, change context to the new VRF, add an IP address, create a new VLAN, and move the
VLAN to the new VRF.
C. Create a VRF, change context to the new VRF, create a new VLAN, add an IP address to the VLAN.
D. Create a VRF, create a new VLAN, move the VLAN to the new VRF, change context to the new VRF,
and add an IP Address.
Answer: D
Avaya examen 3605 3605
NO.8 What does Ping snoop identify?
A. The path that IP traffic takes over an MLT or SMLT
B. The rate of IP traffic flow
C. Which port filter is best to use on MLT networks
D. Rate limiting for ICMP traffic
Answer: A
Avaya examen 3605 certification 3605
NO.9 In a multicast campus, when should an ERS 8600 PIM interface be configured to run in passive
mode?
A. When the interface is used as an edge interface and is aggregating traffic.
B. When the interface is used as a core interface and needs to limit PIM messages to reduce the
system load.
C. When there are no unicast routing paths.
D. When more than one unicast routing protocol is in use.
Answer: A
Avaya 3605 3605 3605 3605
NO.10 The Ethernet Routing Switch (ERS) 8600 switch includes a means to fine tune the memory
resources by allowing the record allocations to be allowed. An ERS 8600 running Release 5.0 needs
to be configured to be optimized for multicast traffic. Which command alters the ERS 8600 to
increases the default allocation of Multicast by 50 percent?
A. Config sys set record record reserve MGID + 50
B. Config sys set max-vlan-resource-reservation 4096
C. Config sys set show sys mgid usage
D. Config sys set multicast-resource-reservation 3073
Answer: D
Avaya certification 3605 3605 examen 3605 examen
Le test simulation Avaya 3605 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Avaya 3605 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.
没有评论:
发表评论