Pass4Test peut offrir la facilité aux candidats qui préparent le test Juniper JN0-643 JN0-632 JN0-660 JN0-332. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Juniper JN0-643 JN0-632 JN0-660 JN0-332 selon le résumé de test réel Juniper JN0-643 JN0-632 JN0-660 JN0-332. Vous pouvez réussir le test à la première fois sans aucune doute.
Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Juniper JN0-643 JN0-632 JN0-660 JN0-332. Ajoutez la Q&A au panier.
Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test Juniper JN0-643 JN0-632 JN0-660 JN0-332 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
Pour vous laisser savoir mieux que la Q&A Juniper JN0-643 JN0-632 JN0-660 JN0-332 produit par Pass4Test est persuadante, le démo de Q&A Juniper JN0-643 JN0-632 JN0-660 JN0-332 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Juniper JN0-643 JN0-632 JN0-660 JN0-332 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.
Vous pouvez tout d'abord télécharger le démo Juniper JN0-643 JN0-632 JN0-660 JN0-332 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.
Code d'Examen: JN0-643
Nom d'Examen: Juniper (Enterprise Routing and Switching, Professional (JNCIP-ENT))
Questions et réponses: 114 Q&As
Code d'Examen: JN0-632
Nom d'Examen: Juniper (Juniper Networks Certified Internet Professional, Security (JNCIP-SEC))
Questions et réponses: 169 Q&As
Code d'Examen: JN0-660
Nom d'Examen: Juniper (Service Provider Routing and Switching, Professional)
Questions et réponses: 171 Q&As
Code d'Examen: JN0-332
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC))
Questions et réponses: 406 Q&As
JN0-632 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-632.html
NO.1 Which two statements regarding external authentication servers for firewall user authentication are
true? (Choose two.)
A. Up to three external authentication server types can be used simultaneously.
B. Only one external authentication server type can be used simultaneously.
C. If the local password database is not configured in the authentication order, and the configured
authentication server is unreachable, authentication is bypassed.
D. If the local password database is not configured in the authentication order, and the configured
authentication server rejects the authentication request, authentication is rejected
Answer: BD
Juniper JN0-632 JN0-632 JN0-632 JN0-632
NO.2 Which type of Web filtering by default builds a cache of server actions associated with each URL it has
checked?
A. Websense Redirect Web filtering
B. integrated Web filtering
C. local Web filtering
D. enhanced Web filtering
Answer: B
Juniper examen certification JN0-632 JN0-632 examen JN0-632 JN0-632 examen
NO.3 Regarding content filtering, what are two pattern lists that can be configured in the Junos OS? (Choose
two.)
A. protocol list
B. MIME
C. block list
D. extension
Answer: BD
certification Juniper JN0-632 JN0-632 JN0-632 examen
NO.4 Which three statements are true regarding IDP? (Choose three.)
A. IDP cannot be used in conjunction with other Junos security features such as SCREEN options, zones,
and security policy.
B. IDP inspects traffic up to the Application Layer.
C. IDP searches the data stream for specific attack patterns.
D. IDP inspects traffic up to the Presentation Layer.
E. IDP can drop packets, close sessions, prevent future sessions, and log attacks for review by network
administrators when an attack is detected.
Answer: BCE
Juniper examen JN0-632 JN0-632 JN0-632 certification JN0-632
NO.5 Which UTM feature requires a license to function?
A. integrated Web filtering
B. local Web filtering
C. redirect Web filtering
D. content filtering
Answer: A
Juniper examen JN0-632 JN0-632
NO.6 Which two statements regarding symmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: AD
Juniper JN0-632 examen JN0-632 certification JN0-632
NO.7 Which statement describes an ALG?
A. An ALG intercepts and analyzes all traffic, allocates resources, and defines dynamic policies to deny
the traffic.
B. An ALG intercepts and analyzes the specified traffic, allocates resources, and defines dynamic policies
to permit the traffic to pass.
C. An ALG intercepts and analyzes the specified traffic, allocates resources, and defines dynamic policies
to deny the traffic.
D. An ALG intercepts and analyzes all traffic, allocates resources, and defines dynamic policies to permit
the traffic to pass.
Answer:
NO.8 Which zone is system-defined?
A. security
B. functional
C. junos-global
D. management
Answer: C
Juniper JN0-632 JN0-632
NO.9 Which two statements are true about hierarchical architecture? (Choose two.)
A. You can assign a logical interface to multiple zones.
B. You cannot assign a logical interface to multiple zones.
C. You can assign a logical interface to multiple routing instances.
D. You cannot assign a logical interface to multiple routing instances.
Answer: BD
Juniper examen JN0-632 JN0-632 JN0-632 JN0-632
NO.10 Which two statements in a source NAT configuration are true regarding addresses, rule-sets, or rules
that overlap? (Choose two.)
A. Addresses used for NAT pools should never overlap.
B. If more than one rule-set matches traffic, the rule-set with the most specific context takes precedence.
C. If traffic matches two rules within the same rule-set, both rules listed in the configuration are applied.
D. Dynamic source NAT rules take precedence over static source NAT rules.
Answer: AB
Juniper JN0-632 JN0-632 JN0-632 examen
NO.11 You want to allow your device to establish OSPF adjacencies with a neighboring device connected to
interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration
hierarchy must you permit OSPF traffic?
A. [edit security policies from-zone HR to-zone HR]
B. [edit security zones functional-zone management protocols]
C. [edit security zones protocol-zone HR host-inbound-traffic]
D. [edit security zones security-zone HR host-inbound-traffic protocols]
Answer: D
certification Juniper certification JN0-632 certification JN0-632 JN0-632 certification JN0-632 JN0-632
NO.12 Which security or functional zone name has special significance to the Junos OS?
A. self
B. trust
C. untrust
D. junos-global
Answer: D
Juniper JN0-632 examen JN0-632 certification JN0-632 certification JN0-632
NO.13 Which configuration keyword ensures that all in-progress sessions are re-evaluated upon committing a
security policy change?
A. policy-rematch
B. policy-evaluate
C. rematch-policy
D. evaluate-policy
Answer: A
Juniper JN0-632 JN0-632
NO.14 A user wants to establish an HTTP session to a server behind an SRX device but is being pointed to
Web page on the SRX device for additional authentication.Which type of user authentication is
configured?
A. pass-through with Web redirect
B. WebAuth with HTTP redirect
C. WebAuth
D. pass-through
Answer: A
certification Juniper certification JN0-632 JN0-632 examen JN0-632
NO.15 You must configure a SCREEN option that would protect your router from a session table flood. Which
configuration meets this requirement?
A. [edit security screen]
user@host# show
ids-option protectFromFlood {
icmp {
ip-sweep threshold 5000;
flood threshold 2000;
}
}
B. [edit security screen]
user@host# show
ids-option protectFromFlood {
tcp {
syn-flood {
attack-threshold 2000;
destination-threshold 2000;
}
}
}
C. [edit security screen]
user@host# show
ids-option protectFromFlood {
udp {
flood threshold 5000;
}
}
D. [edit security screen]
user@host# show
ids-option protectFromFlood {
limit-session {
source-ip-based 1200;
destination-ip-based 1200;
}
}
Answer: D
Juniper JN0-632 JN0-632 JN0-632 JN0-632 examen
NO.16 Which statement contains the correct parameters for a route-based IPsec VPN?
A. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
interface ge-0/0/1.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
B. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
interface st0.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
C. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
bind-interface ge-0/0/1.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
D. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
bind-interface st0.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
Answer: D
Juniper examen JN0-632 JN0-632 JN0-632 examen
NO.17 Which two UTM features require a license to be activated? (Choose two.)
A. antispam
B. antivirus (full AV)
C. content filtering
D. Web-filtering redirect
Answer: AB
Juniper examen JN0-632 JN0-632 JN0-632 examen certification JN0-632
NO.18 Which command do you use to display the status of an antivirus database update?
A. show security utm anti-virus status
B. show security anti-virus database status
C. show security utm anti-virus database
D. show security utm anti-virus update
Answer: A
Juniper JN0-632 JN0-632 examen
NO.19 A network administrator has configured source NAT, translating to an address that is on a locally
connected subnet. The administrator sees the translation working, but traffic does not appear to come
back.What is causing the problem?
A. The host needs to open the telnet port.
B. The host needs a route for the translated address.
C. The administrator must use a proxy-arp policy for the translated address.
D. The administrator must use a security policy, which will allow communication between the zones.
Answer: C
Juniper examen JN0-632 examen certification JN0-632 JN0-632 examen
NO.20 Which three security concerns can be addressed by a tunnel mode IPsec VPN secured by AH.?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer: ACE
Juniper JN0-632 examen JN0-632
没有评论:
发表评论