Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification IBM 000-272, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test IBM 000-272 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test IBM 000-272. Votre argent sera tout rendu si vous échouez le test.
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A IBM 000-272 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat IBM 000-272 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test IBM 000-272.
Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test IBM 000-272, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test IBM 000-272 coûtant un peu d'argent.
Code d'Examen: 000-272
Nom d'Examen: IBM (IBM WebSphere Message Broker V8.0 Solution Development)
Questions et réponses: 52 Q&As
000-272 Démo gratuit à télécharger: http://www.pass4test.fr/000-272.html
NO.1 A sales company is currently running 2 message flows. The first, ProcessOrder, validates
customer orders and then sends the shipping information to the warehouse via an MQ request
message. Once the warehouse has shipped the order, a reply is sent back which is processed by
the second flow, SendConfirmation, to send a confirmation to the customer. The company is now
expanding and has multiple warehouses. The solution developer must modify ProcessOrder to
send messages to each warehouse only for the items it stocks, and SendConfirmation to send a
response message only when all warehouses have replied. What node(s) should the solution
developer use?
A. SendConfirmation -> MQGet
B. SendConfirmation -> Collector
C. ProcessOrder -> Sequence
SendConfirmation -> Resequence
D. ProcessOrder -> AggregateControl and AggregateRequest
SendConfirmation -> AggregateReply
Answer: D
IBM 000-272 certification 000-272 000-272
NO.2 A message flow needs to be designed such that available messages must be processed in
sequential order. Missing messages in the sequence must be discarded if they appear later. The
solution developer implements this message flow using Sequence and Resequence nodes. To
meet the specifications for this message flow, how should the solution developer wire the
Resequence node?
A. The Out, Expire, and Missing terminals should be wired together.
B. The Out terminal should be wired, but the Expire and Missing terminals should be left unwired.
C. The Out and Missing terminals should be wired together, and the Expire terminal should be left
unwired.
D. The Out and Expire terminals should be wired together, and the Missing terminal should be left
unwired.
Answer: D
IBM 000-272 000-272 000-272 000-272
NO.3 Choose Debug
C. 1. Double click Compute node
2. Find code breakpoint location
3. Right click left margin of code window beside this location
4. Choose Add Breakpoint
D. 1. Double click JavaCompute node
2. Find code breakpoint location
3. Left click margin of code window beside this location
4. Choose Add Breakpoint
Answer: C
IBM certification 000-272 000-272 000-272
2. A solution developer needs to implement Web Services Reliable Messaging (WS-RM) on a
message flow for a stock trading company. During unit testing, the solution developer determines
that only the first of four messages, expected in order, have arrived at the destination. During
troubleshooting, what conclusion must the solution developer come to?
A. The second message in the sequence is lost, and so the third and fourth messages have not
processed yet.
B. The sequence number of message two has got out of sync and a reset needs to occur to allow
the other messages to flow to their target.
C. The data of message two is corrupt not allowing message three or four to be processed and
those messages are sitting on the reliablemessaging source queue.
D. The data of message two is corrupt not allowing message three or four to be processed and
those messages are sitting on the reliablemessaging destination queue.
Answer: A
IBM 000-272 examen certification 000-272
3. A solution developer is setting up Message Broker for debugging flows. There is a need to set
the
JVM debug port to 2314 from command line for a specific execution group called "MDM" and a
broker called "WMBBRK1". Which command does the solution developer need to use?
A. mqsichangebroker WMBBRK1 -e MDM -o ComIbmJVMManager -n jvmDebugPort -v 2314
B. mqsireportproperties WMBBRK1 -e MDM -i ComIbmJVMManager -n jvmDebugPort -v 2314
C. mqsichangeproperties WMBBRK1 -e MDM -o ComIbmJVMManager -n jvmDebugPort -v 2314
D. mqsichangeproperties WMBBRK1 -e MDM -i ComIbmJVMManager -n jvmDebugPort -v 2314
Answer: C
IBM 000-272 certification 000-272
4. A customer recently implemented a new standard that all deployable objects must display
Version,
Author, and Defect number in the QuickView panel of Message Broker Explorer. How must the
solution developer code this requirement?
A. &MQSI_Version=v1.0 MQSI&
&MQSI Author=George MQSI&
&MQSI Defect=123456 MQSI&
B. %MQSI_Version=v1.0 MQSI%
%MQSI Author=George MQSI%
%MQSI Defect=123456 MQSI%
C. $MQSI_Version=v1.0 MQSI$
$MQSI Author=George MQSI$
$MQSI Defect=123456 MQSI$
D. &WMB_Version=v1.0 WMB&
&WMB Author=George WMB&
&WMB Defect=123456 WMB&
Answer: C
IBM examen 000-272 000-272 examen 000-272 examen 000-272
NO.4 A solution developer has been informed of a problem with a message flow. Based on the error
given, the problem seems to occur in ESQL code. The solution developer determines the need to
debug the code. How does the solution developer set a breakpoint in the ESQL code?
A. 1. Right click message flow
NO.5 Set breakpoint in appropriate location
NO.6 To activate any new function included in a fix pack, which command must the solution
developer
issue?
A. mqsicvp command.
B. mqsireioad command.
C. mqsichangebroker command with the -f parameter.
D. mqsichangeproperties command with the -n parameter.
Answer: C
certification IBM 000-272 examen 000-272 000-272 000-272 000-272
NO.7 Redeploy flow
B. 1. Right click Compute node
2. Choose open ESQL
3. Set breakpoint on right hand side margin
NO.8 A healthcare company needs to implement WS-Security integrity message signing for an
existing
web service flow that will now be handling sensitive data. Which nodes can the solution developer
use to develop this enhancement? (Choose two)
A. HTTPInput
B. HTTPRequest
C. SOAPInput
D. SOAPRequest
E. SOAPEnvelope
Answer: C,D
IBM examen certification 000-272 000-272 certification 000-272
NO.9 A solution developer creates a message flow that includes an XSLTransform node. The node
property specifies that the XSL style sheet is to be cached. The solution developer deploys the
XSL style sheet in the BAR file with the message flow. Subsequently, the style sheet needs to be
revised. How does the solution developer enable the message flow to use the revised style sheet?
A. Use the mqsicacheadmin command to refresh the cache with the new style sheet.
B. Update the BAR file with the modified style sheet and redeploy it.
C. Update the style sheet in the Application Development view of the Toolkit. Once the changes
are saved, the style sheet is reloadedautomatically by any message flows that use it.
D. Update the style sheet in the directory specified by the Style sheet directory property of the
XSLTransform node. Once the changes aresaved, the style sheet is reloaded automatically by any
message flows that use it.
Answer: B
IBM 000-272 certification 000-272
NO.10 A solution developer has deployed a message flow containing the DatabaseRetrieve node. The
connection properties to the database were created using the mqsicreateconfigurableservice
command. The solution developer has been told that the database is to be relocated to a different
server. How should the connection properties be updated by the solution developer to reflect the
new server?
A. Run mqsisetdbparms.
B. Run mqsichangebroker.
C. Run mqsichangeproperties.
D. Use a context sensitive menu in the Broker view of the Toolkit.
Answer: C
certification IBM 000-272 000-272 000-272 000-272 examen
Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test IBM 000-272 à la première fois.
没有评论:
发表评论