Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Symantec ASC-094. Le guide d'étude de Pass4Test comprend les excercices de Symantec ASC-094 et la Q&A qui peut vous permetrre à réussir 100% le test Symantec ASC-094. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
Code d'Examen: ASC-094
Nom d'Examen: Symantec (ASC Storage Management Assessment)
Questions et réponses: 77 Q&As
Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.
Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Symantec ASC-094. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Symantec ASC-094.
ASC-094 Démo gratuit à télécharger: http://www.pass4test.fr/ASC-094.html
NO.1 Why is it important to upgrade Storage Foundation diskgroups and filesystem versions after upgrading
the version of software on a system?
A. Storage Foundation will be unable to access the files residing on diskgroups and filesystems that have
an older version than the binaries.
B. Older diskgroup and filesystem versions are only supported during a rolling upgrade.
C. Upgrading the diskgroup and filesystem versions will enable the full capabilities of the product to be
deployed.
D. It eliminates warnings being sent to the console due to the out-of-date diskgroup and filesystem
versions.
Answer: C
Symantec examen ASC-094 examen ASC-094 examen ASC-094 ASC-094
NO.2 A customer has a Veritas Volume Replicator (VVR) configuration with srlprot attribute set to autodcm. In
the event that the SRL overflows, what will happen?
A. VVR will delay any further writes to the primary node until the SRL has drained below the
low-watermark threshold
B. VVR tracks new writes in the DCM while it drains the SRL. Once the SRL is empty, VVR then
automatically replicates writes tracked by the DCM.
C. VVR tracks new writes in the DCM while it drains the SRL. Once the SRL is empty, VVR stops and the
DCM must be replayed manually.
D. VVR stops replicating and writes in the SRL are converted into DCM logging. The DCM must then be
replayed manually.
Answer: D
Symantec certification ASC-094 ASC-094
NO.3 What are the limitations when upgrading CVM and CFS to version 5.1?
A. All systems within a CVM/CFS configuration must have the same versions of software; rolling upgrades
with mixed versions of software are only supported from 5.1 onwards.
B. All systems within a CVM/CFS configuration must have the latest MP for the current version prior to the
upgrade to 5.1.
C. Rolling upgrades can only be performed from version 5.0 to 5.1; rolling upgrades from 4.1 are not
supported
D. Rolling upgrades can only be performed if the diskgroup and filesystem versions remain unchanged
until all of the systems have been upgraded to the same version of software
Answer: A
Symantec ASC-094 certification ASC-094
NO.4 A customer has a Veritas Volume Replicator (VVR) configuration with the srlprot attribute set to override.
If there is an SRL overflow while the RLINK is connected, what happens to the running application issuing
writes.?
A. Application continues, and VVR overflows the SRL.
B. Application is blocked until SRL drains 5% or 20 megabytes, whichever is smaller.
C. Application is blocked until the RLINK is automatically detached after AutoDetach seconds have
elapsed.
D. Application continues, and VVR is automatically converted to DCM logging.
Answer: B
certification Symantec ASC-094 ASC-094
NO.5 You have been asked to review a customer's VVR configuration, and found that the Rlink has the
following attributes: srlprot=override bandwidth_limit=30 mbps What is the risk to the customer's
application if the SRL overflows?
A. Application writes will be stalled which may cause the front-end application to fail or hang.
B. The bandwidth_limit will be increased so the SRL can drain, and this may overload the network and
cause application performance problems.
C. The size of the SRL will be increased, leaving less space if the application volumes need to be
extended.
D. VVR will start to use the DCM, which requires a replay of the DCM, during which, Write Order Fidelity
for the application data is lost.
Answer: A
certification Symantec ASC-094 ASC-094 examen
NO.6 Which two capabilities of Symantec Common Product Installer (CPI) are not supported by the
web-based installer for Storage Foundation 5.1? (Select two.)
A. installing Storage Foundation
B. uninstalling Storage Foundation
C. upgrading Storage Foundation
D. configuring Storage Foundation for Oracle RAC (SFRAC)
E. adding license keys for Storage Foundation
Answer: C, D
certification Symantec certification ASC-094 ASC-094 ASC-094 examen
NO.7 Which two components should ordinarily be configured within a Relicated Volume Group (RVG)?
(Select two.)
A. SRL
B. RDS
C. DCM
D. Diskgroup
E. Rlink
Answer: A, C
Symantec examen ASC-094 examen ASC-094 ASC-094 ASC-094
NO.8 In which order must the tasks be performed to initially synchronize VVR replication using
checkpoints? .
Start replication using vradmin -c checkpoint startrep . Run "vxrvg -c checkpoint
checkstart" . Run "vxrvg checkend" . Perform a block-level backup at the primary . Restore raw backup at
the secondary
A. 1, 4, 5, 3, 2
B. 2, 1, 4, 5, 3
C. 2, 4, 3, 5, 1
D. 2, 4, 5, 3, 1
Answer: C
Symantec ASC-094 ASC-094 examen ASC-094 examen ASC-094
NO.9 A customer has two identical servers that support an OLTP database and billing application, respectively.
Each night they run a batch job to create a full Volume Manager snapshot of their OLTP database, which
is then imported and mounted on the other server to support the billing application. The customer has
asked an administrator to upgrade the version of Storage Foundation on the OLTP server to version 5.1.
Which action should be taken when performing this upgrade?
A. Upgrade the Storage Foundation binaries, diskgroups, and filesystems on the OLTP server and advise
the customer to upgrade their billing system to the same version of Storage Foundation software.
B. Inform the customer that they must upgrade the OLTP and Billing servers at the same time.
C. Modify the Storage Foundation configuration to use space-saving snapshots instead of full snapshots.
D. Only upgrade the Storage Foundation binaries on the OLTP server, do not upgrade the diskgroup and
filesystem versions until after the Billing server has been upgraded.
Answer: D
certification Symantec certification ASC-094 ASC-094 ASC-094
NO.10 A customer has Veritas Volume Replication (VVR) version 5.1 with the following Rlink attributes:
synchronous=override bandwidth_limit=30 mbps Which statement is true?
A. If VVR is unable to maintain synchronous replication within the defined bandwidth limits, then the
bandwidth_limit attribute will be overridden to try and maintain a synchronous copy of the data at the
secondary site.
B. If VVR is unable to maintain synchronous replication within the defined bandwidth limits, it will
automatically fall-back to asynchronous mode to enable replication within the defined bandwidth limits.
C. VVR will throttle the write operations on the primary server in order to replicate the data
synchronously to the secondary site within the bandwidth limits. In the event of a network failure VVR will
fallback to asynchronous replication mode and the write operations on the primary server will no longer be
throttled, but the bandwidth for replicating to the secondary site will still be limited.
D. The bandwidth_limit attribute does not apply to synchronous replication, however in the event that the
rLink falls back to asynchronous mode the data will then be replicated within the defined bandwidth limits.
Answer: C
Symantec ASC-094 examen ASC-094 ASC-094 examen
Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test Symantec ASC-094 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification Symantec ASC-094.
没有评论:
发表评论