Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A HP HP0-771 HP0-M14 HP0-J12 HP0-G11 HP0-Y12 HP0-Y11 dans Pass4Test pour se former avant le test HP HP0-771 HP0-M14 HP0-J12 HP0-G11 HP0-Y12 HP0-Y11.
L'importance de la position de Certificat HP HP0-771 HP0-M14 HP0-J12 HP0-G11 HP0-Y12 HP0-Y11 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen HP HP0-771 HP0-M14 HP0-J12 HP0-G11 HP0-Y12 HP0-Y11 par votre première fois.
Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test HP HP0-771 HP0-M14 HP0-J12 HP0-G11 HP0-Y12 HP0-Y11 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
La Q&A HP HP0-771 HP0-M14 HP0-J12 HP0-G11 HP0-Y12 HP0-Y11 de Pass4Test est liée bien avec le test réel de HP HP0-771 HP0-M14 HP0-J12 HP0-G11 HP0-Y12 HP0-Y11. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test HP HP0-771 HP0-M14 HP0-J12 HP0-G11 HP0-Y12 HP0-Y11 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.
Avec l'aide du Pass4Test, vous allez passer le test de Certification HP HP0-771 HP0-M14 HP0-J12 HP0-G11 HP0-Y12 HP0-Y11 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de HP HP0-771 HP0-M14 HP0-J12 HP0-G11 HP0-Y12 HP0-Y11, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.
Code d'Examen: HP0-771
Nom d'Examen: HP (Designing and Implementing HP Enterprise Backup Solutions)
Questions et réponses: 60 Q&As
Code d'Examen: HP0-M14
Nom d'Examen: HP (HP Project and Portolio Management 7.1 Software)
Questions et réponses: 69 Q&As
Code d'Examen: HP0-J12
Nom d'Examen: HP (Supporting ESL E-Series and EML E-Series Libraries)
Questions et réponses: 119 Q&As
Code d'Examen: HP0-G11
Nom d'Examen: HP (CCI Fundamentals for Solution Architects)
Questions et réponses: 132 Q&As
Code d'Examen: HP0-Y12
Nom d'Examen: HP (Building ProCurve Resilient, Adaptive Networks)
Questions et réponses: 116 Q&As
Code d'Examen: HP0-Y11
Nom d'Examen: HP (ProCurve Security 7.31)
Questions et réponses: 132 Q&As
HP0-J12 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-J12.html
NO.1 What is the hard wired IP address of the Interface Manager card in an EML E-Series tape library on the
private network?
A.1.1.1.1
B.10.0.0.1
C.192.168.2.1
D.155.155.155.1
Answer: C
HP HP0-J12 certification HP0-J12 HP0-J12
NO.2 How many cartridge slots can be used in an 8U drive expansion module mounted at the bottom of an
EML E-Series library?
A.48
B.87
C.94
D.103
Answer: B
HP HP0-J12 examen HP0-J12 HP0-J12 HP0-J12 HP0-J12 examen
NO.3 Which scheme is used in the Command Line Interface for drive and slot numbers in ESL E-Series
tape libraries?
A.0 based
B.1 based
C.2 based
D.Hex based
Answer: B
HP HP0-J12 HP0-J12 certification HP0-J12 HP0-J12 HP0-J12 examen
NO.4 Which statement about an EML E-Series library is correct?
A.It allows serverless backup with only a few configuration steps if a Secure Manager license is installed.
B.The initial configuration can be done over the front panel, Command View TL or the serial port on the
robotics controller using CLI.
C.It is fully compliant with the Storage Management Initiative Specifications (SMI-S) and can be
configured with HP Storage Essentials.
D.It bridges the capabilities and features between the business-class HP StorageWorks MSL Series and
enterprise-class ESL E-Series tape libraries.
Answer: D
HP examen HP0-J12 examen certification HP0-J12 HP0-J12
NO.5 What is the purpose of the Stop button on the Operator Control Panel of ESL E-Series tape libraries?
A.to halt the robotics
B.to restart the library
C.to shut down the library
D.to pause a running backup process
Answer: A
HP certification HP0-J12 HP0-J12
NO.6 Which parts of the Extended Tape Library Architecture are SNIA compliant and support the Storage
Management Initiative Specifications (SMI-S)? (Select two.)
A.Secure Manager
B.Interface Manager
C.Interface Controller
D.Robotics Controller
E.Command View Tape Library
Answer: BE
HP certification HP0-J12 HP0-J12 examen HP0-J12
NO.7 Click the Exhibit button.
What does Number 2 on the exhibit represent?
A.x axis motor
B.y axis motor
C.optical scanner
D.home position sensor
Answer: B
HP examen HP0-J12 HP0-J12 HP0-J12 certification HP0-J12 HP0-J12
NO.8 Click the Exhibit button.
Which ESL E-Series tape library component does the exhibit display?
A.cluster controller
B.cabinet controller
C.Interface Manager
D.Interface Controller
Answer: C
certification HP certification HP0-J12 certification HP0-J12 certification HP0-J12
NO.9 What can be connected using the vacant Ethernet port on the right side of the cabinet controller in an
ESL E-Series tape library?
A.an external LAN
B.cluster controllers
C.interface management card
D.Fibre Channel interface controllers
Answer: A
HP HP0-J12 HP0-J12 certification HP0-J12
NO.10 What must be configured in CommandView TL when manually adding an ESL E-Series library?
A.library IP address
B.library serial number
C.tape drive and robot SCSI IDs
D.Interface Manager user name and password
Answer: A
HP examen HP0-J12 certification HP0-J12
NO.11 What are possible causes of inventory failure in ESL E-Series tape libraries? (Select two.)
A.The library has a drive failure.
B.One of the clusters is disconnected.
C.The library front is facing bright sunlight.
D.Unapproved bar code labels are being used.
E.The Interface Controller is disconnected from the Fibre Channel switch.
Answer: CD
HP HP0-J12 HP0-J12 HP0-J12 HP0-J12 HP0-J12 examen
NO.12 Which tape device attribute does the ESL E-Series tape library Interface Manager use to determine
the physical location of each tape drive in the library?
A.bus number
B.SCSI address
C.serial number
D.drive slot position
Answer: C
certification HP HP0-J12 certification HP0-J12 HP0-J12 HP0-J12 examen
NO.13 Click the Exhibit button.
In the exhibit, which item number represents the host Fibre Channel connections?
A.4
B.6
C.9
D.10
Answer: C
HP HP0-J12 certification HP0-J12 certification HP0-J12
NO.14 Which HP document provides the most current, supported configurations for Enterprise class libraries
in a SAN environment?
A.Service Guide
B.SAN Design Guide
C.EBS Compatibility Matrix
D.training course documentation
Answer: C
HP certification HP0-J12 HP0-J12
NO.15 What are the standard cabling requirements for the Interface Manager card of an EML E-Series tape
library?
A.4 x Ethernet to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
B.4 x Ethernet to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
C.4 x Fibre Channel to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
D.4 x Fibre Channel to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
Answer: A
certification HP certification HP0-J12 HP0-J12 HP0-J12 HP0-J12 examen certification HP0-J12
NO.16 With which management specification does the Command View TL Provider comply?
A.Direct Management Initiative (DMI)
B.Advanced Remote Management (ARM)
C.Simple Network Management Protocol (SNMP)
D.Storage Management Initiative Specification (SMI-S)
Answer: D
HP HP0-J12 HP0-J12
NO.17 What can you do to speed up the power-on process while troubleshooting an EML 71e library?
A.Remove all media from the library.
B.Power-on the library with the load port door open.
C.Disable the auto audit, remembering to re-enable it and reboot the library before leaving the customer
site.
D.Configure inventory mode to bar code labels not required, remembering to reset bar code labels
required before leaving the customer site.
Answer: C
HP HP0-J12 HP0-J12 examen
NO.18 How often is the CommandView TL Health Summary screen updated?
A.every 30 seconds
B.at 15-minute intervals
C.whenever the library status changes
D.configurable to any value up to 900 seconds
Answer: C
certification HP HP0-J12 HP0-J12 HP0-J12 examen
NO.19 Click the Exhibit button.
Which ESL E-Series tape library component (used to carry data cartridges to a secondary cabinet) is
shown in the figure?
A.CLM arm
B.CLM controller
C.picker assembly
D.cartridge transfer robot
Answer: A
HP HP0-J12 examen HP0-J12 examen certification HP0-J12
NO.20 What are the main considerations when choosing a location for an EML E-Series tape library? (Select
three.)
A.floor space
B.room height
C.power requirements
D.lighting requirements
E.grounding requirements
F.distance to disk storage
Answer: ACE
HP certification HP0-J12 HP0-J12 examen certification HP0-J12 HP0-J12
NO.21 What are advantages of using Secure Manager EML? (Select two.)
A.It allows library partitioning.
B.Management of direct backup is allowed.
C.It provides faster access to tape devices.
D.Device level mapping is easily configured.
E.User access management is easily configured.
Answer: AD
HP examen HP0-J12 certification HP0-J12 HP0-J12
NO.22 When is Lock Element Addressing used in the ESL E-Series library?
A.with multiple tape drive clusters
B.as an electronic lock of the access doors
C.when multiple Interface Controllers are used
D.for cross-linked libraries with three or more cabinets
Answer: D
certification HP HP0-J12 examen HP0-J12 HP0-J12 HP0-J12
NO.23 For which connection, other than the cabinet controller, is the I2C network cable used in ESL E-Series
tape libraries?
A.external LANs
B.cluster controllers
C.interface management cards
D.Fibre Channel interface controllers
Answer: B
HP examen HP0-J12 HP0-J12 certification HP0-J12 HP0-J12 HP0-J12
NO.24 Click the Exhibit button.
What is the maximum supported number of drives that can be installed in a CLM configuration?
A.40
B.44
C.60
D.64
Answer: B
HP HP0-J12 HP0-J12 HP0-J12
NO.25 Click the Exhibit button.
Which ESL E-Series tape library configuration is shown in the Operator Control Panel Library screen?
A.last cabinet
B.primary cabinet
C.secondary cabinet
D.stand-alone cabinet
Answer: B
HP examen HP0-J12 HP0-J12
NO.26 What does the cabinet controller assembly of an ESL E-Series tape library provide a SCSI interface
to?
A.tape devices
B.library robotics
C.management interface card
D.e2400-160 Interface Controller
Answer: B
certification HP HP0-J12 examen HP0-J12 HP0-J12
NO.27 What is the maximum cartridge slot count in an EML E-Series library?
A.325
B.470
C.505
D.595
Answer: C
HP HP0-J12 HP0-J12 HP0-J12
NO.28 What is reported by the LP/PNL sensor of an ESL E-Series tape library?
A.library door status
B.x-axis motor position
C.y-axis motor position
D.magazines and load ports status
Answer: D
HP HP0-J12 examen HP0-J12
NO.29 Click the Exhibit button.
Which component is connected to port E1 of the cluster controller if it is in drive cluster 0 of an ESL
E-Series tape library?
A.cabinet controller
B.Interface Controller
C.lower cluster controller
D.Interface Manager card
Tape Library
Answer: A
HP examen HP0-J12 examen certification HP0-J12
NO.30 What is important to remember when changing from Manual to Automatic mode of the Interface
Manager of an ESL E-Series tape library?
A.All drives must be taken offline.
B.Fibre Channel cables must be unplugged.
C.Interface Controllers must be powered off first.
D.Any customizations created in Manual mode will be lost.
Answer: D
HP HP0-J12 HP0-J12 examen HP0-J12 examen certification HP0-J12
没有评论:
发表评论