Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Microsoft 70-410, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Microsoft 70-410 coûtant un peu d'argent.
Certification Microsoft 70-410 est un des tests plus importants dans le système de Certification Microsoft. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test Microsoft 70-410 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.
Le test Microsoft 70-410 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Microsoft 70-410 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.
Si vous êtes intéressé par l'outil formation Microsoft 70-410 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.
Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Microsoft 70-410 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Microsoft 70-410 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Microsoft 70-410 plus facilement avec la Q&A de Pass4Test.
Code d'Examen: 70-410
Nom d'Examen: Microsoft (Installing and Configuring Windows Server 2012)
Questions et réponses: 168 Q&As
Le test Microsoft 70-410 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test Microsoft 70-410. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.
70-410 Démo gratuit à télécharger: http://www.pass4test.fr/70-410.html
NO.1 Your network contains a file server named Server1 that runs Windows Server 2012.All client
computers
run Windows 8.You need to ensure that when users are connected to the network, they always use
local
offline files that are cached from Server1.Which Group Policy setting should you configure?
A.Turn on economical application of administratively assigned Offline Files.
B.Configure slow-link mode.
C.Configure Slow link speed.
D.Enable file synchronization on costed networks.
Answer: B
Microsoft 70-410 70-410 examen
NO.2 Your network contains an Active Directory domain named adatum.com.The computer
accounts for allmember servers are located in an organizational unit (OU) named Servers.You link a
Group Policy object(GPO) to the Servers OU.You need to ensure that the domain s Backup Operators
group is a member of the local Backup Operators group on each member server.The solution must
not remove any groups from the local Backup Operators groups.What should you do?
A.Add a restricted group named Backup Operators.Add adatum\Backup Operators to the This group
is a
member of list.
B.Add a restricted group named Backup Operators.Add adatum\Backup Operators to the Members
of this
group list.
C.Add a restricted group named adatum\Backup Operators.Add Backup Operators to the This group
is a
member of list.
D.Add a restricted group named adatum\Backup Operators.Add Backup Operators to the Members
of this
group list.
Answer: C
certification Microsoft 70-410 examen certification 70-410
NO.3 You have a server named Server1 that runs Windows Server 2012.You need to remove
Windows
Explorer, Windows Internet Explorer, and all related components and files from Server1.What
should you
run on Server1?
A.msiexec.exe /uninstall iexplore.exe /x
B.msiexec.exe /uninstall explorer.exe /x
C.Uninstall-WindowsFeature Server-Gui-Shell -Remove
D.Uninstall-WindowsFeature Server-Gui-Mgmt-Infra -Remove
Answer: C
certification Microsoft 70-410 certification 70-410
NO.4 You have a server that runs Windows Server 2012.The disks on the server are configured as shown
in the
exhibit.(Click the Exhibit button.) You need to create a storage pool that contains Disk 1 and Disk
2.What
should you do first?
A.Convert Disk 1 and Disk 2 to dynamic disks.
B.Delete volume E.
C.Convert Disk 1 and Disk 2 to GPT disks.
D.Create a volume on Disk 2.
Answer: B
Microsoft certification 70-410 70-410 examen certification 70-410 70-410 70-410
NO.5 Note: This question is part of a series of questions that use the same or similar answer
choices.An
answer choice may be correct for more than one question in the series.Each question is
independent of
the other questions in this series.Information and details provided in a question apply only to that
question.Your network contains a server named Server1 that runs Windows Server 2012.Server1
has the
Hyper-V server role installed.Server1 hosts four virtual machines named VM1, VM2, VM3, and
VM4.Server1 is configured as shown in the following table.
You install a network monitoring application on VM2.You need to ensure that all of the traffic sent
to VM3
can be captured on VM2.What should you configure?
A.the startup order
B.Processor Compatibility
C.resource metering
D.Resource control
E.Port mirroring
F.Virtual Machine Chimney
G.Integration Services
H.Automatic Start Action
I.the VLAN ID
J.Single-root I/O virtualization
K.NUMA topology
Answer: E
Microsoft 70-410 examen certification 70-410 70-410 examen 70-410
NO.6 You install Windows Server 2012 on a standalone server named Server1.You configure Server1
as a VPN server.You need to ensure that client computers can establish PPTP connections to
Server1.Which two firewall rules should you create? (Each correct answer presents part of the
solution.Choose two.)
A.an inbound rule for TCP port 1723
B.an inbound rule for protocol 47
C.an inbound rule for TCP port 1701
D.an outbound rule for TCP port 1723
E.an outbound rule for protocol 47
F.an outbound rule for TCP port 1701
Answer: AB
Microsoft certification 70-410 certification 70-410 70-410 70-410
NO.7 Your network contains an Active Directory domain named adatum.com.The domain contains
three
domain controllers.The domain controllers are configured as shown in the following table.
DC3 loses network connectivity due to a hardware failure.You plan to remove DC3 from the
domain.You
log on to DC3.You need to identify which service location (SRV) records are registered by DC3.What
should you do?
A.Open the %windir%\system32\dns\backup\adatum.com.dns file.
B.Open the %windir%\system32\config\netlogon.dns file.
C.Run ipconfig /displaydns.
D.Run dcdiag /test:dns.
Answer: B
Microsoft examen certification 70-410 70-410 70-410
NO.8 Your network contains an Active Directory domain named adatum.com.The domain contains
several
thousand member servers that run Windows Server 2012.All of the computer accounts for the
member
servers are in an organizational unit (OU) named ServersAccounts.Servers are restarted only
occasionally.You need to identify which servers were restarted during the last two days.What should
you
do?
A.Run dsquery serverand specify the oparameter.
B.Run Get-ADComputerand specify the SearchScopeparameter.
C.Run Get-ADComputerand specify the lastLogonproperty.
D.Run dsquery computerand specify the stalepwdparameter.
Answer: C
Microsoft examen 70-410 70-410 70-410 examen 70-410
NO.9 You have a server named Server1 that runs Windows Server 2012.Server1 has the Hyper-V
server role
installed.Server1 is connected to two Fibre Channel SANs and is configured as shown in the
following
table.
You have a virtual machine named VM1.You need to configure VM1 to connect to SAN1.What
should you
do first?
A.Configure network adapter teaming.
B.Create a Virtual Fibre Channel SAN.
C.Create a Hyper-V virtual switch.
D.Add one HBA.
Answer: B
Microsoft certification 70-410 70-410
NO.10 Your network contains an Active Directory domain named contoso.com.You log on to a domain
controller
by using an account named Admin1.Admin1 is a member of the Domain Admins group.You view the
properties of a group named Group1 as shown in the exhibit.(Click the Exhibit button.) Group1 is
located
in an organizational unit (OU) named OU1.You need to ensure that users from Group1 can modify
the
Security settings of OU1 only.What should you do from Active Directory Users and Computers?
A.Modify the Security settings of Group1.
B.Modify the Managed By settings on OU1.
C.Right-click contoso.com and select Delegate Control.
D.Right-click OU1 and select Delegate Control.
Answer: D
Microsoft certification 70-410 70-410
Est-ce que vous vous souciez encore pour passer le test Microsoft 70-410? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Microsoft 70-410, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Microsoft 70-410. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.
没有评论:
发表评论