Pass4Test peut offrir nombreux de documentations aux candidats de test Microsoft 70-504-VB, et aider les candidats à réussir le test. Les marétiaux visés au test Microsoft 70-504-VB sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Microsoft 70-504-VB 100%.
Finalement, la Q&A Microsoft MB6-869 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Microsoft MB6-869 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Microsoft, vous aurez un meilleur salaire et une plus grande space à se développer.
Beaucoup de gens trouvent difficile à passer le test Microsoft 70-595, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Microsoft 70-595 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Après une longue attente, les documentations de test Microsoft 70-595 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Microsoft 70-595 à la première fois.
Code d'Examen: 70-504-VB
Nom d'Examen: Microsoft (TS: MS.NET Frmewk 3.5, Workflow Foundation App Dev)
Questions et réponses: 96 Q&As
Code d'Examen: MB6-869
Nom d'Examen: Microsoft (Microsoft Dynamics AX 2012 Development Introduction)
Questions et réponses: 79 Q&As
Code d'Examen: 70-595
Nom d'Examen: Microsoft (TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010)
Questions et réponses: 57 Q&As
Avec l'aide du Pass4Test, vous allez passer le test de Certification Microsoft 70-504-VB plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Microsoft 70-504-VB, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Microsoft MB6-869 est une bonne examination. Mais c'est difficile à passer le test Microsoft MB6-869. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
70-504-VB Démo gratuit à télécharger: http://www.pass4test.fr/70-504-VB.html
NO.1 New CodePrimitiveExpression(newAmount)
NO.2 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. You
use the state machine workflow in the application.
You plan to implement a mechanism that allows a host application to query a state machine workflow
instance that is currently executing.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim runtime As New WorkflowRuntime()
02 Dim instance As WorkflowInstance = _
03 runtime.CreateWorkflow(GetType(Workflow1))
04 instance.Start()
05
You need to identify the current state of the workflow.
Which code segment should you insert at line 05?
A. Dim currentstate As String = instance.GetWorkflowDefinition().ToString
B. Dim currentstate As String = _
instance.GetWorkflowDefinition().ExecutionStatus.ToString
C. Dim smwi As New StateMachineWorkflowInstance(runtime, _
instance.InstanceId)
Dim currentstate As String = smwi.StateHistory(0)
D. Dim smwi As New StateMachineWorkflowInstance(runtime, _
instance.InstanceId)
Dim currentstate As String = smwi.CurrentStateName
Answer: D
Microsoft examen 70-504-VB 70-504-VB examen certification 70-504-VB certification 70-504-VB
NO.3 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application uses a sequential workflow.
The workflow is implemented in a class named ProcessOrders. The workflow contains a dependency
property named EmployeeID.
You need to ensure that the EmployeeID property is assigned a value when the host application tries to
create a new workflow instance.
Which code segment should you use?
A. Dim runtime As New WorkflowRuntime()
Dim processOrders As New ProcessOrders()
processOrders.EmployeeID = "NBK"
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(ProcessOrders))
B. Dim runtime As New WorkflowRuntime()
Dim processOrders As New ProcessOrders()
processOrders.SetValue( _
processOrders.EmployeeIDProperty, "NBK")
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(ProcessOrders))
C. Dim runtime As New WorkflowRuntime()
Dim dict As Dictionary(Of String, Object) = _
New Dictionary(Of String, Object)()
dict.Add("EmployeeID", "NBK")
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(ProcessOrders), dict)
D. Dim runtime As New WorkflowRuntime()
Dim dict As Dictionary(Of String, Object) = _
New Dictionary(Of String, Object)()
dict.Add("EmployeeIDProperty", "NBK")
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(ProcessOrders), dict)
Answer: C
Microsoft examen certification 70-504-VB 70-504-VB examen 70-504-VB examen
NO.4 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
The application contains the following code segment.
<ExternalDataExchange()> _
Public Interface IOrderService
Function CreateOrder(ByVal customerId As String) As Boolean
Function CancelOrder(ByVal orderId As String) As Boolean
Function SuspendOrder(ByVal ordered As String) As Boolean
End Interface
You need to create workflow activities that correspond to each operation in the IOrderService interface.
You also need to ensure that the activities use the C# programming language.
Which utility should you use?
A. wfc.exe
B. csc.exe
C. wca.exe
D. vbc.exe
Answer: C
Microsoft 70-504-VB examen 70-504-VB examen 70-504-VB
NO.5 A custom activity defined in an assembly named LitwareActivities is defined as follows:
Namespace LitwareActivities
Public Class WriteLineActivity
Inherits Activity
Protected Overrides Function Execute(ByVal executionContext As
System.Workflow.ComponentModel.ActivityExecutionContext) _
As System.Workflow.ComponentModel.ActivityExecutionStatus
Console.WriteLine(Message)
Return ActivityExecutionStatus.Closed
End Function
Private aMessage As String
Public Property Message() As String
Get
Return aMessage
End Get
Set(ByVal value As String)
aMessage = value
End Set
End Property
End Class
End Namespace
You need to create a sequential workflow where the execution path can be generated on the fly by an
application.
Which XML code segment should you use?
A. <SequentialWorkflowActivity
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
B. <Workflow
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
C. <Workflow
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
D. <SequentialWorkflowActivity
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
Answer: A
Microsoft examen 70-504-VB 70-504-VB 70-504-VB
NO.6 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application contains a state workflow.
You write the following code segment.
Dim amount As Integer = 10
Dim runtime As New WorkflowRuntime()
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(DynamicUpdateWorkflow))
instance.Start()
Dim smwi As New StateMachineWorkflowInstance(runtime, _
instance.InstanceId)
A dependency property named Status is defined in this workflow.
The value of a variable named amount is used to set the state of the workflow.
You need to ensure that the host application changes the state of the workflow on the basis of the value of
the amount variable.
What are the two possible code segments that you can use to achieve this goal? (Each correct answer
presents a complete solution. Choose two.)
A. If amount >= 1000 Then
smwi.SetState("HighValueState")
Else
smwi.SetState("LowValueState")
End If
B. If amount >= 1000 Then
smwi.StateMachineWorkflow.SetValue _
(DynamicUpdateWorkflow.StatusProperty, "HighValueState")
Else
smwi.StateMachineWorkflow.SetValue _
(DynamicUpdateWorkflow.StatusProperty, "LowValueState")
End If
C. If amount >= 1000 Then
instance.GetWorkflowDefinition().SetValue
(DynamicUpdateWorkflow.StatusProperty, "HighValueState")
Else
instance.GetWorkflowDefinition().SetValue
(DynamicUpdateWorkflow.StatusProperty, "LowValueState")
End If
D. If amount >= 1000 Then
Dim high As StateActivity = _
CType(smwi.StateMachineWorkflow.Activities("HighValueState"), _
StateActivity)
smwi.SetState(high)
Else
Dim low As StateActivity = _
CType(smwi.StateMachineWorkflow.Activities("LowValueState"), _
StateActivity)
smwi.SetState(low)
End If
Answer: A AND D
Microsoft examen 70-504-VB examen 70-504-VB 70-504-VB examen
NO.7 instance.ApplyWorkflowChanges(workflowchanges)
You need to build a host application that modifies the condition according to the business requirement in
workflow instances that are currently executing.
Which code segment should you insert at line 11?
A. Dim condition1 As RuleExpressionCondition = _
CType(conditions("Check"), RuleExpressionCondition)
B. Dim condition1 As RuleExpressionCondition = _
CType(conditions("ifElseBranch1"), _
RuleExpressionCondition)
C. Dim condition1 As RuleExpressionCondition = _
CType(conditions("ifElseBranch2"), _
RuleExpressionCondition)
D. Dim condition1 As RuleExpressionCondition = _
CType(conditions("Declarative Rule Condition"), _
RuleExpressionCondition)
Answer: A
Microsoft examen 70-504-VB 70-504-VB examen 70-504-VB examen certification 70-504-VB
14. You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
You plan to add a workflow to the application. You add a HandleExternalEvent activity named InitiatePO
to the workflow.
You need to ensure that the workflow responds only to events raised by the members of the Active
Directory role named Managers.
Which code segment should you use?
A. Private Sub OnSetupRoles(ByVal sender As Object, ByVal e As EventArgs)
Dim poInitiators As New WorkflowRoleCollection()
Dim poInitiatorsRole As ActiveDirectoryRole = _
ActiveDirectoryRoleFactory.CreateFromAlias("Managers")
poInitiators.Add(poInitiatorsRole)
InitiatePO.Roles = poInitiators
End Sub
B. Private Sub OnSetupRoles(ByVal sender As Object, ByVal e As EventArgs)
Dim poInitiators As New WorkflowRoleCollection()
Dim poInitiatorsRole As ActiveDirectoryRole = _
ActiveDirectoryRoleFactory.CreateFromAlias("Managers")
InitiatePO.Roles = poInitiators
End Sub
C. Private Sub OnSetupRoles(ByVal sender As Object, ByVal e As EventArgs)
Dim poInitiators As New WorkflowRoleCollection()
Dim poInitiatorsRole As ActiveDirectoryRole = _
ActiveDirectoryRoleFactory.CreateFromAlias("Managers")
poInitiators.Add(poInitiatorsRole)
InitiatePO.Roles.Contains(poInitiatorsRole)
End Sub
D. Private Sub OnSetupRoles(ByVal sender As Object, ByVal e As EventArgs)
Dim poInitiators As New WorkflowRoleCollection()
Dim poInitiatorsRole As ActiveDirectoryRole = _
ActiveDirectoryRoleFactory.CreateFromAlias("Managers")
poInitiators.Add(poInitiatorsRole)
End Sub
Answer: A
Microsoft examen 70-504-VB examen 70-504-VB examen certification 70-504-VB
15. You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application uses a sequential workflow that meets the following requirements:
The workflow application calls an external method to simultaneously notify two users about a task.
The host application raises the TaskCompleted event after each user completes a task.
The workflow has two HandleExternalEvent activities that handle the TaskCompleted event in parallel for
two users.
You need to ensure that each TaskCompleted event is handled by the HandleExternalEvent activity
mapped to the respective user.
Which code segment should you use?
A. <ExternalDataExchange()> _
Public Interface ITaskService
Sub CreateTask(ByVal taskId As String, ByVal assignee As String, _
ByVal text As String)
Event TaskCompleted As EventHandler(Of TaskEventArgs)
End Interface
B. <ExternalDataExchange()> _
Public Interface ITaskService
Sub CreateTask(ByVal taskId As String, ByVal assignee As String, _
ByVal text As String)
<CorrelationAlias("taskId", "e.Id")> _
<CorrelationInitializer()> _
Event TaskCompleted As EventHandler(Of TaskEventArgs)
End Interface
C. <ExternalDataExchange()> _
Public Interface ITaskService
<CorrelationInitializer()> _
Sub CreateTask(ByVal taskId As String, ByVal assignee As String, _
ByVal text As String)
<CorrelationAlias("taskId", "e.Id")> _
Event TaskCompleted As EventHandler(Of TaskEventArgs)
End Interface
D. <ExternalDataExchange()> _
<CorrelationParameter("taskId")> _
Public Interface ITaskService
<CorrelationInitializer()> _
Sub CreateTask(ByVal taskId As String, ByVal assignee As String, _
ByVal text As String)
<CorrelationAlias("taskId", "e.Id")> _
Event TaskCompleted As EventHandler(Of TaskEventArgs)
End Interface
Answer: D
Microsoft examen 70-504-VB certification 70-504-VB
NO.8 You are writing a sequential console workflow that consists of a delay activity and a code activity, as
shown in the exhibit. (Click the Exhibit button for the sequential console workflow image.)
In the execution code of the second activity, you try to modify the workflow as follows:
Private Sub delayActivity_InitializeTimeoutDuration(ByVal sender As System.Object, ByVal e As
System.EventArgs)
Console.Title = "Modifiability of a Workflow"
Console.WriteLine("Wait ...")
End Sub
Private Sub codeActivity_ExecuteCode(ByVal sender As System.Object, ByVal e As System.EventArgs)
Dim delay As DelayActivity = CType(sender, DelayActivity)
Console.WriteLine(delay.Name)
Dim workflowChanges As New WorkflowChanges(Me)
Dim codeActivity As New CodeActivity()
codeActivity.Name = "codeActivity2"
AddHandler codeActivity.ExecuteCode, AddressOf Me.codeActivity2_ExecuteCode
workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Me.ApplyWorkflowChanges(workflowChanges)
End Sub
Private Sub codeActivity2_ExecuteCode(ByVal sender As System.Object, ByVal e As System.EventArgs)
Dim codeActivity As CodeActivity = CType(sender, CodeActivity)
Console.WriteLine(codeActivity.Name)
Console.ReadLine()
End Sub
You also have set the modifiability of the workflow to a code condition that is set to the following function:
Private Sub UpdateCondition(ByVal sender As System.Object, ByVal e As ConditionalEventArgs)
If (TimeSpan.Compare(Me.delayActivity.TimeoutDuration, New TimeSpan(0, 0, 5)) > 0) Then
e.Result = False
Else
e.Result = True
End If
End Sub
Which code segment should you use to handle the exception?
A. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As ArgumentOutOfRangeException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
B. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As InvalidProgramException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
C. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As InvalidOperationException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
D. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As OverflowException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
Answer: C
Microsoft 70-504-VB examen certification 70-504-VB 70-504-VB examen
