Vous n'avez besoin que de faire les exercices à propos du test HP HP0-S30 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.
Si vous voulez ne se soucier plus à passer le test HP HP0-S30, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test HP HP0-S30. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A HP HP0-S30 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
La Q&A de Pass4Test vise au test Certificat HP HP0-S30. L'outil de formation HP HP0-S30 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.
Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A HP HP0-S30 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat HP HP0-S30 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test HP HP0-S30.
Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test HP HP0-S30 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification HP HP0-S30.
Code d'Examen: HP0-S30
Nom d'Examen: HP (Design and Implementation of HP SIM and HP Insight Control)
Questions et réponses: 128 Q&As
Obtenez la Q&A de test HP HP0-S30 de Pass4Test plus tôt, vous pouvez réussir le test Certification HP HP0-S30 plus tôt.
HP0-S30 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-S30.html
NO.1 You noticed that a system that was being monitored by Insight Control performance management has a
critical status in the PF column. However, the HW status displays as "normal". What could cause this to
occur?
A. The HP management agents have been downgraded.
B. Network teaming was enabled on the managed server.
C. Performance monitoring was disabled in HP SIM for that managed server.
D. The license was removed from that managed server within HP SIM.
Answer: A
HP HP0-S30 examen certification HP0-S30 HP0-S30 examen HP0-S30 certification HP0-S30
NO.2 What must you enable before performing an offline analysis with Insight Control performance
management? (Select two.)
A. Alerting
B. Discovery
C. Logging
D. Monitoring
E. Reporting
Answer: C,D
HP certification HP0-S30 certification HP0-S30 HP0-S30 examen
NO.3 Which type of component is considered part of the HP Systems Insight Manager (HP SIM)
management domain?
A. central management server (CMS)
B. network client
C. any third-party device
D. any management information base (MIB) compiled device
Answer: A
HP examen HP0-S30 HP0-S30 HP0-S30 HP0-S30
NO.4 Which feature of HP Systems Insight Manager (HP SIM) enables you to view contract and warranty
information for managed systems?
A. ProLiant Essentials
B. Integrity Essentials
C. Storage Essentials Enterprise Suite
D. Service Essentials Remote Support Pack
Answer: D
HP HP0-S30 examen certification HP0-S30
NO.5 What type of information displays when you place your cursor over a server blade graphic in the HP
SIM picture view? (Select two.)
A. server name
B. slot or bay number
C. contact information
D. rack location
E. server role
Answer: A,B
HP examen HP0-S30 certification HP0-S30 HP0-S30 examen HP0-S30 examen HP0-S30
NO.6 What should you consider when monitoring devices using the DMI protocol?
A. Only systems that have event indication subscriptions configured in HP Systems Insight Manager (HP
SIM) are managed by DMI.
B. Only desktops and workstations communicating with the central management server (CMS) are
identified by the DMI protocol.
C. To be identified by DMI, managed systems running Windows or HP-UX must run the same operating
system as the CMS.
D. A Management Information File (MIF) must be compiled in HP SIM for each device model being
managed by the DMI protocol.
Answer: C
certification HP certification HP0-S30 certification HP0-S30 certification HP0-S30
NO.7 What happens when an event is generated that affects an entire rack or enclosure?
A. Several systems within the rack or enclosure can generate a trap, but they are filtered by HP SIM to
only show one event per rack or enclosure.
B. Multiple traps are received by HP SIM and can cause multiple events to trigger multiple notification
alerts.
C. An alert is logged for each server associated with the enclosure, but the same event increases a
counter each time the same trap is received.
D. Traps are received from a server, but they are not associated with the enclosure and are managed
independently.
Answer: A
HP HP0-S30 examen HP0-S30
NO.8 HP Systems Insight Manager (HP SIM) can be hosted on which operating environments? (Select
three.)
A. HP-UX
B. Linux
C. OVMS
D. Windows
E. Solaris
F. AIX
Answer: A,B,D
certification HP HP0-S30 HP0-S30
NO.9 DRAG DROP
Click the Task button. Match the type of collection available in HP SIM with its characteristic.
Answer:
NO.10 What is the default view of the BladeSystem page in BladeSystem Integrated Manager?
A. Icons
B. Location
C. Table
D. Tree
Answer: D
certification HP HP0-S30 HP0-S30 HP0-S30 examen
NO.11 What should you do when enabling the WMI Mapper in HP Systems Insight Manager (HP SIM)?
A. Run the identification task to properly identify systems that are running WMI.
B. Run the software polling task to return WMI information for managed systems.
C. Rerun the discovery task to discover systems that are running WMI.
D. Run a hardware polling task to get status information in WMI instrumented devices.
Answer: A
certification HP HP0-S30 examen HP0-S30 HP0-S30 certification HP0-S30
NO.12 When performing a remote installation of Insight Remote Support, you receive an error stating that the
install cannot proceed. What can cause this issue?
A. A SIMadmin user with administrative privileges is not performing the installation.
B. The installation requires that FTP be installed on the remote server before installing Insight Remote
Support.
C. The installation initiated from a Microsoft Remote Desktop (RDP) session that does not have the active
desktop session.
D. The installation requires that you run Insight Software Advisor, which launches the full installation of
Insight Control.
Answer: C
HP examen HP0-S30 HP0-S30 examen
NO.13 How much can HP Systems Insight Manager (HP SIM) 6.X scale?
A. HP SIM can manage 2,500 operating system instances.
B. HP SIM can manage 5,000 physical and virtual machines plus supporting iLOs and OAs.
C. HP SIM can manage 10,000 physical and virtual machines.
D. HP SIM is limited by the amount of memory on the central management server (CMS).
Answer: B
HP HP0-S30 examen HP0-S30 certification HP0-S30
NO.14 From which components do the Insight Foundation Agents collect data in order to provide
management information to HP SIM? (Select two.)
A. operating system
B. system drivers
C. management host
D. serial and parallel ports
E. memory subsystem
Answer: A,C
certification HP certification HP0-S30 HP0-S30 HP0-S30 HP0-S30 examen
NO.15 What must you consider when configuring community strings?
A. They must be unique to each system that is being managed.
B. HP SIM and managed systems must have matching community strings.
C. The community strings must not be more than eight characters long.
D. All systems must be configured with a write community string.
Answer: B
HP certification HP0-S30 HP0-S30 HP0-S30 certification HP0-S30
NO.16 What is a good indicator that Insight Control performance management has not been installed with HP
SIM?
A. The status of the managed devices under the HW column shows "unknown" status.
B. The system table view does not show a PF column.
C. The System Management Homepage does not display any performance information.
D. The Tool menu in HP SIM does not display any performance management options.
Answer: B
HP examen HP0-S30 certification HP0-S30
NO.17 HP Systems Insight Manager (HP SIM) indicates a minor degraded state on a managed system. You
investigate further by clicking on the Hardware status (HW) link. HP SIM should launch another page with
the System Management Home (SMH). Instead, a "Page not found" message displays. What can cause
this issue.?
A. A firewall is configured on the target managed node that prevents port 50000 from communicating with
HP SIM.
B. The system is no longer available or the system is down and HP SIM has not yet updated the minor
status to critical status.
C. HP SIM is referencing the Fully Qualified Domain Name (FQDN) when launching the SMH and cannot
resolve the IP to the FQDN.
D. The community strings do not match between HP SIM and the target managed node and therefore
cannot display the SMH.
Answer: C
HP HP0-S30 examen HP0-S30 HP0-S30 examen certification HP0-S30
NO.18 You received an SNMP Authentication trap, but did not receive a notification in HP Systems Insight
Manager (HP SIM). What could cause this?
A. The default setting for Enabling Trap Handling in SNMP extensions was disabled in HP SIM.
B. The trap received was not sent from a managed node that is in the authorized list.
C. A filter was set in the discovery task to ignore these authentication traps by default.
D. A trust relationship was not established between HP SIM and the managed node sending the trap.
Answer: A
HP examen HP0-S30 examen HP0-S30 HP0-S30
NO.19 What must you consider regarding the central management server (CMS) when managing a Windows
environment with HP Systems Insight Manager (HP SIM)?
A. Timeout values for processing WMI information from Windows-based systems might need to be
changed on the CMS.
B. All systems being managed must have a trust relationship with the CMS for single sign-on (SSO).
C. There must be a WMI Mapper installed on the CMS or on another server on the network.
D. All Windows-based systems must be in the same domain as the CMS.
Answer: C
certification HP HP0-S30 HP0-S30
NO.20 How many agents are there in the HP Insight Management Agents family?
A. one monolithic agent for all devices
B. four: a server, NIC, storage, and foundation agent
C. five: a server, NIC, storage, foundation, and Version Control Agent
D. six: a server, NIC, storage, foundation, client, and Version Control Agent
Answer: C
HP HP0-S30 examen certification HP0-S30 HP0-S30
Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification HP HP0-S30, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test HP HP0-S30 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.
没有评论:
发表评论