2014年2月12日星期三

Le plus récent matériel de formation HP HP5-K03D

Pass4Test est un seul site de provider le guide d'étude HP HP5-K03D de qualité. Peut-être que vous voyiez aussi les Q&A HP HP5-K03D dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification HP HP5-K03D. Il n'y a pas de soucis à réussir le test avec une haute note.

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test HP HP5-K03D à la première fois.

C'est sûr que le Certificat HP HP5-K03D puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test HP HP5-K03D, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat HP HP5-K03D peut bien tester la professionnalité de IT.

Code d'Examen: HP5-K03D
Nom d'Examen: HP (Delta - Supporting and Servicing HP 3PAR StoreServ Solutions)
Questions et réponses: 30 Q&As

HP5-K03D Démo gratuit à télécharger: http://www.pass4test.fr/HP5-K03D.html

NO.1 What must be done prior to running HP 3PAR SmartStart?
A. The service laptop needs to be connected to the StoreServ system.
B. The Service Processor and StoreServ system must be connected to the same subnet
C. An installation service call must be placed with HP Central,
D. A zone must be created between the StoreServ system and the Service Processor.
Answer: B

HP   HP5-K03D   HP5-K03D   HP5-K03D   HP5-K03D examen

NO.2 A customer has an existing c70fJ0 enclosure, with 6 blades and FlexFabric modules. You have
been asked to install 5 additional blades for a virtualization project. The customer requires shared
storage for a Hyper-V cluster.
Their existing storage infrastructure is 1Gb iSCSI.
What would be the most cost-effective method for adding a new 3PAR storage?
A. Directly attach the FC Host ports of the c7000.
B. Install SAN Switch Modules in the c7000.
C. Install two Brocade 8 / 8 SAN Switches
D. Upgrade the network switches to 10GB
Answer: A

HP   HP5-K03D   HP5-K03D   HP5-K03D

NO.3 A customer has three HP 3PAR StoreServ 10000 systems in different sites on their
metropolitan campus The FC-based SANs within the different sites consist of B-series 8 Gbps
switches with an active port-based zoning. Between the sites, there is a 10 Gbps Ethernet
connection.
Which remote copy configuration should you recommend?
A. N-to-1 Configuration
B. Synchronous Long Distance Configuration
C. Unidirectional 1-to-1 Configuration
D. 1-to-N Configuration

NO.4 Your customer has an existing HP 3PAR F400 array with two controller nodes and eight DC3
disk enclosures Each DC3 disk enclosure is fully populated with 300GB 15k disk drives.
The customer has purchased a new HP 3PAR StoreServ 7400 two-node system with five additional
drive enclosures to be installed in a second data center. This system is fully populated with 450GB
10k drives. Data will be migrated from the F400 to the 7400 by using Remote Copy Fibre Channel
(RCFC). The 7400 will then become the primary system, but data will continue to be replicated
between the systems. Additionally, the customer has ordered extra 8GB/S FC adapters for the new
7400.
What is the maximum number of configurable host ports on the new HP StoreServ 7400 array in the
customer environment?
A. 4
B. 8
C. 10
D. 12
Answer: D

HP   certification HP5-K03D   HP5-K03D   HP5-K03D   HP5-K03D
5. Your customer has an existing HP 3PAR F400 array with two controller nodes and eight DC3
disk enclosures. Each DC3 disk enclosure is fully populated with 300GB 15k disk drives.
The customer has purchased a new HP 3PAR StoreServ 7400 two-node system with five additional
drive enclosures to be installed in a second data center. This system is fully populated with 450GB
10k drives Data will be migrated from the F400 to the 7400 by using Remote Copy Fibre Channel
(RCFC). The 7400 will then become the primary system, but data will continue to be replicated
between the systems. Additionally, the customer has ordered extra 8GB/s FC adapters for the new
7400.
During the installation you record these serial numbers for the new HP 3PAR StoreServ system:
HP serial number CZ32439658
3PAR serial number 1628580
Which SPID is assigned during the installation?
A. SP0001628580
B. SP32439658
C. 1628580
D. 00032439658
Answer: A

certification HP   HP5-K03D   certification HP5-K03D   HP5-K03D examen   HP5-K03D
Reference:http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03603825 /c036038
2 5.pdf(page 7, second bullet)
6. Which statements are true about the HP 3PAR StoreServ 7000? (Select two.)
A. Within a column, there can be empty slots between drives.
B. Columns of drives must be of the same drive type and rotational speed for HDDs.
C. Drives must be added in identical pairs.
D. The LFF enclosure cannot be mixed with the SFF enclosure on the same node pair,
E. All columns have to contain the same number of drives.
Answer: B,C

HP   certification HP5-K03D   HP5-K03D
7. Your customer plans to build a two-tier architecture with one HP 3PAR StoreServ 7400. Layer 1
should be the SSD Tier, and Layer 2 should be the Fast Class Tier. After the SmartStart configuration
is complete, the customer connects to the system through the InformOS Management Console.
Which default CPGs are created during the process of initializing the storage system?
A. SSD RAID 1 and 5: Fast Class 1 and 6 default CPGs
B. SSD RAID 1 and 5: Fast Class 1 and 5 default CPGs
C. SSD RAID 1,5,and 6; Fast Class 1 and 6 default CPGs
D. SSD RAID 1 and 5 FastClass 1,5 and 6 default CPGs
Answer: A

certification HP   HP5-K03D   HP5-K03D examen   HP5-K03D

Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.

没有评论:

发表评论