Dernières IBM C2180-270 examen pratique questions et réponses

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test IBM C2180-270, la voie à la réussite de votre professionnel sera ouverte pour vous.

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test IBM C2180-270 juste avec la Q&A de IBM C2180-270 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

Le test IBM C2180-270 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test IBM C2180-270 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Le test IBM C2180-270 est l'un très improtant dans tous les tests de Certification IBM, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A IBM C2180-270 de Pass4Test.

Code d'Examen: C2180-270
Nom d'Examen: IBM (IBM Business Process Manager Advanced V7.5, Integration Development )
Questions et réponses: 56 Q&As

C2180-270 Démo gratuit à télécharger: http://www.pass4test.fr/C2180-270.html

NO.1 An integration developer needs to rewrite business rule logic written in Java using a business rule
component. The integration developer has implemented the selector shown in the exhibits below.
What behavior will the integration developer observe with the configured selector?
A. The module will fail to compile because there is no wiring between the selector and the destination
components.
B. The module will fail to compile because the destination of the selector can only be rule logic or decision
table.
C. The runtime exception will be thrown because there is no default component configured.
D. The runtime exception will be thrown if the date when the selector is invoked does not fall in any of the
specified date ranges.
Answer: D

certification IBM   certification C2180-270   C2180-270   C2180-270 examen   certification C2180-270

NO.2 An integration developer is testing the process shown in the following exhibits.
If the integration developer starts an instance of the ProcessA process with an input of "HELLO", which of
the following strings will the LogSnippet snippet write to System.out?
A. output1=ORIGINAL :: aString=ORIGINAL
B. output1=ORIGINAL :: aString=MODIFIED
C. output1=MODIFIED :: aString=ORIGINAL
D. output1=MODIFIED :: aString=MODIFIED
Answer: C

IBM   C2180-270   C2180-270

NO.3 An integration developer has configured a BPEL business process for a customer, as shown below:
What should the integration developer consider when implementing this flow?
A. An Otherwise element must be added to the Choice activity.
B. A Timeout element must be added to the ReceiveChoice activity.
C. It is possible for Snippet1 and Snippet2 to run concurrently in the same instance of the process.
D. If Snippet1 is invoked in an instance of the process, that instance will not receive messages sent to the
Service2 interface.
Answer: D

certification IBM   certification C2180-270   C2180-270   certification C2180-270   C2180-270 examen

NO.4 An integration developer has configured a business state machine, as shown below:
What behavior will the integration developer observe when executing the flow?
A. If Condition3 is false, then Exit1 will execute after Timeout2 expires.
B. If Condition1 and Condition2 are both true, then a runtime exception will be thrown.
C. If Condition1 is false, then Timeout1 will not be evaluated.
D. If Condition1 and Condition2 are both false, then operation2 will be called by the business state
machine.
Answer: A

IBM   C2180-270 examen   C2180-270   C2180-270 examen

NO.5 An integration developer has configured a BPEL business process for a customer, as shown below:
What behavior will the integration developer observe when executing the flow?
A. It is possible for both Snippet2 and Snippet3 to execute.
B. The execution order of the links entering Snippet2 and Snippet3 has no impact on the process flow.
C. The gateway leading into Snippet5 will cause an error because the navigation behavior is not set
correctly.
D. The gateway leading into Snippet4 will cause an error because the link exiting Snippet2 has no
condition.
Answer: C

IBM   certification C2180-270   C2180-270   certification C2180-270

NO.6 An integration developer has configured a BPEL business process for a customer, as shown below:
Assume that max is greater than min. What should the integration developer take into account when
implementing this for each loop?
A. There must be an array associated with the for each loop.
B. It is possible to exit the loop before Index is equal to max.
C. The values of min and max cannot be changed once the for each activity begins.
D. If the scope inside of the for each activity is set to isolated, then the activities will run sequentially.
Answer: D

IBM   certification C2180-270   C2180-270   C2180-270

NO.7 A client requires that a new BPEL process return a fault message to the requester in case the process
does not complete correctly. The integration developer has added a fault handler to the process to catch
all exceptions. How should the integration developer return the fault message?
A. Use a throw activity of a business fault.
B. Use a reply activity using a standard fault.
C. Use a reply activity using a business fault defined in the interface.
D. Use a rethrow activity in the fault handler on the process scope using a fault defined in the interface.
Answer: C

IBM examen   C2180-270   C2180-270   C2180-270   certification C2180-270

NO.8 An integration developer needs to check which Common Event Infrastructure (CEI) events have been
generated for a business process and review the information contained inside each event. Where will the
integration developer find this information?
A. In the Common Base Event browser application.
B. In the monitoring widgets in Business Space.
C. In the administrative console -> Service Integration -> Common Event Infrastructure -> Event Service
D. In the Business Process Choreographer Explorer -> Views tab -> Process Instances -> Events
generated
Answer: A

IBM examen   certification C2180-270   certification C2180-270   C2180-270

NO.9 An integration developer has developed the following business process, as shown in the exhibit: The
invoke activities Invoke1 and Invoke2 are synchronous invocations and execute in a few seconds. A
compensation handler needs to be defined for Snippet2 following a business action from the customer.
The customer considers performance to be a key requirement. How would the integration developer
implement these requirements? The business process needs to be a:
A. long-running process because of the required fault handler.
B. long-running process because of the required compensation handler.
C. microflow because no human tasks are required.
D. microflow for best performance as every invoke activity uses synchronous invocation and executes
quickly.
Answer: B

IBM   C2180-270 examen   C2180-270

NO.10 A business analyst has made several runtime changes to deployed business rules that were
implemented in IBM Integration Designer (IID). Which task should the integration developer perform so
that the rule group can be imported using IID, and the changes are reflected in the project source?
A. Use the administrative console to export the rule group.
B. Use the Business Rule Manager application to export the rule group.
C. Use the Business Rules widget in Business Space to export the rule group.
D. Use the Business Process Choreographer (BPC) Explorer to export the rule group information.
Answer: A

certification IBM   certification C2180-270   C2180-270   certification C2180-270   C2180-270

Avec l'aide du Pass4Test, vous allez passer le test de Certification IBM C2180-270 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de IBM C2180-270, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.