On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification SASInstitute A00-201. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test SASInstitute A00-201 sans aucune doute si vous choisissez le Pass4Test.
Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test SASInstitute A00-201 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
On peut voir que beaucoup de candidats ratent le test SASInstitute A00-201 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test SASInstitute A00-201 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test SASInstitute A00-201, Pass4Test peut offrir les Q&As des autres test Certification IT.
Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A SASInstitute A00-201 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de SASInstitute A00-201 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.
Code d'Examen: A00-201
Nom d'Examen: SASInstitute (SAS base programming exam)
Questions et réponses: 140 Q&As
A00-201 Démo gratuit à télécharger: http://www.pass4test.fr/A00-201.html
NO.1 The contents of the raw data file CALENDAR are listed below:
----|----10---|----20---|----30
01012000
The following SAS program is submitted:
data test;
infile 'calendar';
input @1 date mmddyy10.;
if date = '01012000'd then event = 'January 1st';
run;
Which one of the following is the value of the EVENT variable?
A. 01012000
B. January 1st
C. . (missing numeric value)
D. The value can not be determined as the program fails to execute due to errors.
Answer: D
SASInstitute A00-201 examen A00-201 A00-201
NO.2 The following SAS program is submitted and reads 100 records from a raw data file:
data work.total;
infile 'file-specification' end = eof;
input name $ salary;
totsal + salary;
<insert IF statement here>
run;
Which one of the following IF statements writes the last observation to the output data set?
A. if end = 0;
B. if eof = 0;
C. if end = 1;
D. if eof = 1;
Answer: D
SASInstitute A00-201 A00-201 examen A00-201
NO.3 The following SAS program is submitted:
data work.flights;
destination = 'CPH';
select(destination);
when('LHR') city = 'London';
when('CPH') city = 'Copenhagen';
otherwise;
end;
run;
Which one of the following is the value of the CITY variable?
A. London
B. Copenh
C. Copenhagen
D. ' ' (missing character value)
Answer: B
SASInstitute examen A00-201 examen certification A00-201 A00-201
NO.4 The following SAS program is submitted:
libname sasdata 'SAS-data-library';
data test;
set sasdata.chemists;
if jobcode = 'chem3'
then description = 'Senior Chemist';
else description = 'Unknown';
run;
A value for the variable JOBCODE is listed below:
JOBCODE
CHEM3
Which one of the following values does the variable DESCRIPTION contain?
A. chem3
B. Unknown
C. Senior Chemist
D. ' ' (missing character value)
Answer: B
SASInstitute examen A00-201 A00-201 A00-201
NO.5 Which one of the following statements is true regarding the name of a SAS array?
A. It is saved with the data set.
B. It can be used in procedures.
C. It exists only for the duration of the DATA step.
D. It can be the same as the name of a variable in the data set.
Answer: C
SASInstitute A00-201 A00-201 A00-201
NO.6 The following SAS program is submitted:
data work.month;
date = put('13mar2000'd,ddmmyy10.);
run;
Which one of the following represents the type and length of the variable DATE in the output data set?
A. numeric, 8 bytes
B. numeric, 10 bytes
C. character, 8 bytes
D. character, 10 bytes
Answer: D
SASInstitute examen A00-201 A00-201 examen A00-201 examen
NO.7 The contents of two SAS data sets named EMPLOYEE and SALARY are listed below:
The following SAS program is submitted:
data work.empsalary;
merge work.employee (in = inemp)
work.salary (in = insal);
by name;
if inemp and insal;
run;
How many observations will the data set WORK.EMPSALARY contain?
A. 2
B. 4
C. 5
D. 6
Answer: B
SASInstitute examen A00-201 examen A00-201 A00-201 A00-201
NO.8 The following SAS program is submitted:
data work.retail;
cost = '20000';
total = .10 * cost;
run;
Which one of the following is the value of the variable TOTAL in the output data set?
A. 2000
B. '2000'
C. . (missing numeric value)
D. ' ' (missing character value)
Answer: A
SASInstitute A00-201 examen certification A00-201 A00-201 A00-201
NO.9 The following SAS DATA step is submitted:
libname temp 'SAS-data-library';
data temp.report;
set sasuser.houses;
newvar = price * 1.04;
run;
Which one of the following statements is true regarding the program above?
A. The program is reading from a temporary data set and writing to a temporary data set.
B. The program is reading from a temporary data set and writing to a permanent data set.
C. The program is reading from a permanent data set and writing to a temporary data set.
D. The program is reading from a permanent data set and writing to a permanent data set.
Answer: D
certification SASInstitute A00-201 certification A00-201 A00-201 certification A00-201 A00-201
NO.10 The following SAS program is submitted:
data work.total;
set work.salary(keep = department wagerate);
by department;
if first.department then payroll = 0;
payroll + wagerate;
if last.department;
run;
The SAS data set WORK.SALARY, currently ordered by DEPARTMENT, contains 100 observations for
each of 5 departments.
Which one of the following represents how many observations the WORK.TOTAL data set contains?
A. 5
B. 20
C. 100
D. 500
Answer: A
certification SASInstitute A00-201 A00-201
NO.11 Which one of the following is true when SAS encounters a data error in a DATA step?
A. The DATA step stops executing at the point of the error, and no SAS data set is created.
B. A note is written to the SAS log explaining the error, and the DATA step continues to execute.
C. A note appears in the SAS log that the incorrect data record was saved to a separate SAS file for
further examination.
D. The DATA step stops executing at the point of the error, and the resulting DATA set contains
observations up to that point.
Answer: B
SASInstitute examen A00-201 examen certification A00-201 certification A00-201
NO.12 The contents of the raw data file FURNITURE are listed below:
----|----10---|----20---|----30
chair,,table
chair,couch,table
The following SAS program is submitted:
data stock;
infile 'furniture' dsd;
input item1 $ item2 $ item3 $;
run;
Which one of the following is the value of the variable named ITEM2 in the first observation of the output
data set?
A. table
B. ,table
C. . (missing numeric value)
D. ' ' (missing character value)
Answer: D
SASInstitute examen A00-201 examen certification A00-201 certification A00-201
NO.13 The following SAS program is submitted:
proc means data = sasuser.houses std mean max;
var sqfeet; run;
Which one of the following is needed to display the standard deviation with only two decimal places?
A. Add the option MAXDEC = 2 to the MEANS procedure statement.
B. Add the statement MAXDEC = 7.2; in the MEANS procedure step.
C. Add the statement FORMAT STD 7.2; in the MEANS procedure step.
D. Add the option FORMAT = 7.2 option to the MEANS procedure statement.
Answer: A
SASInstitute examen A00-201 A00-201 A00-201 examen certification A00-201 certification A00-201
NO.14 The SAS data set named WORK.TEST is listed below:
Which one of the following SAS programs created this data set?
A. data work.test;
capacity = 150;
if 100 le capacity le 200 then
airplanetype = 'Large' and staff = 10;
else airplanetype = 'Small' and staff = 5;
run;
B. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
end;
else
do;
airplanetype = 'Small';
staff = 5;
end;
run;
C. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
else
do;
airplanetype = 'Small'; airplanetype = 'Small';
staff = 5;
end;
run;
D. data work.test;D.data work.test;
capacity = 150;
if 100 le capacity le 200 then;
airplanetype = 'Small'; airplanetype = 'Small';
staff = 5;
else;
airplanetype = 'Large'; airplanetype = 'Large';
staff = 10;
run;
Answer: B
SASInstitute A00-201 A00-201
NO.15 A raw data record is shown below:
07.an2002
Which one of the following informats would read this value and store it as a SAS date value?
A. date9.
B. ddmonyy9.
C. ddMMMyy9.
D. ddmmmyyyy9.
Answer: A
SASInstitute A00-201 certification A00-201
NO.16 A raw data record is listed below:
----|----10---|----20---|----30
Printing 750
The following SAS program is submitted:
data bonus;
infile 'file-specification';
input dept $ 1 - 11 number 13 - 15;
<insert code here>
run;
Which one of the following SAS statements completes the program and results in a value of 'Printing750'
for the DEPARTMENT variable?
A. department = trim(dept) || number;
B. department = dept || input(number,3.);
C. department = trim(dept) || put(number,3.);
D. department = input(dept,11.) || input(number,3.);
Answer: C
SASInstitute examen A00-201 examen A00-201 certification A00-201 A00-201
NO.17 The following SAS program is submitted:
libname rawdata1 'location of SAS data library';
filename rawdata2 'location of raw data file';
data work.testdata;
infile <insert item here>;
input sales1 sales2;
run;
Which one of the following is needed to complete the program correctly?
A. rawdata1
B. rawdata2
C. 'rawdata1'
D. 'rawdata2'
Answer: B
SASInstitute examen A00-201 A00-201 examen A00-201 examen
NO.18 Click the Exhibit button to view a listing of the SASUSER.HOUSES data set.
The following SAS program is submitted:
proc report data = sasuser.houses nowd headline;
column style price;
where price lt 100000;
<insert DEFINE statement here>
define price / mean width = 9;
title;
run;
The following ouput is created by the REPORT procedure:
Which one of the following DEFINE statements completes the above program and produces the above
output?
A. define style / order width = 9;
B. define style / group width = 9;
C. define style / across width = 9;
D. define style / display width = 9;
Answer: B
SASInstitute A00-201 examen A00-201 examen A00-201 A00-201 A00-201 examen
NO.19 The following SAS SORT procedure step generates an output data set:
proc sort data = sasuser.houses out = report;
by style;
run;
In which library is the output data set stored?
A. WORK
B. REPORT
C. HOUSES
D. SASUSER
Answer: A
SASInstitute A00-201 certification A00-201
NO.20 The following SAS program is submitted:
data work.staff;
JobCategory = 'FA';
JobLevel = '1';
JobCategory = JobCategory || JobLevel;
run;
Which one of the following is the value of the variable JOBCATEGORY in the output data set?
A. FA
B. FA1
C. FA 1
D. ' ' (missing character value)
Answer: A
SASInstitute A00-201 certification A00-201 A00-201 A00-201 A00-201
Le test de Certification SASInstitute A00-201 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.
没有评论:
发表评论