2014年1月14日星期二

Guide de formation plus récente de SUN 310-600

Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test SUN 310-600 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification SUN 310-600.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test SUN 310-600 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Vous SUN 310-600 pouvez télécharger le démo SUN 310-600 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.

Vous avez aussi la possibilité à réussir le test SUN 310-600. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.

Pass4Test possède un l'outil de formation particulier à propos de test SUN 310-600. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation SUN 310-600 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.

Code d'Examen: 310-600
Nom d'Examen: SUN (SUN SIGMA BLACK BELT CERTIFICATION)
Questions et réponses: 100 Q&As

Bien qu'il ne soit pas facile à réussir le test SUN 310-600, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test SUN 310-600, mais encore à vous aider d'économiser votre temps.

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test SUN 310-600 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test SUN 310-600.

310-600 Démo gratuit à télécharger: http://www.pass4test.fr/310-600.html

NO.1 A factorial 2-level DOE does NOT:
A.Confirm possible critical Xs
B.Confirm design parameter impacts on Ys
C.Confirm causes identified by hypothesis tests
D.Confirm best robust design
Correct:D

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.2 Which tool is used to evaluate process variation over time?
A.Pie chart
B.Scatter plot
C.Individuals chart
D.Pareto Chart
Correct:C

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.3 Which one of the following statements about internal and external customers is true?
A.Process output that is not paid for only goes to internal customers
B.External customers should not be privy to project details when working on joint projects
C.Requirements of internal customers will drive more improvement than requirements of external
customers
D.Internal customers are fellow associates who need the process output to carry out their work
Correct:D

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.4 Calculation of DPO requires knowledge of:
A.The total number of defects and the total number of units
B.Only the total number of defects
C.The total number of defects, the total number of units, the number of opportunities per unit and the
length of the time period studied
D.The total number of defects, the total number of units and the number of opportunities per unit
Correct:D

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.5 Which of the following is NOT a benefit associated with control charts?
A.They demonstrate process performance relative to customer specifications
B.They demonstrate stability and predictability of a process over time
C.They show parameter performance, mean, and control limits
D.They offer early warning of possible problems
Correct:A

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.6 Which tool is best for illustrating possible causes for an effect?
A.QFD
B.Fishbone diagram
C.Process flowchart
D.Histogram
Correct:B

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.7 What is the purpose of a pilot?
A.To analyze a process and determine the source of defects
B.To test a solution on a small or limited scale
C.To implement a compromised solution when true consensus cannot be reached
D.To collect baseline data from an existing process
Correct:B

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.8 What is a good use for hypothesis testing during the Analyze phase?
A.To determine the current process capability
B.To determine optimum process capability parameters
C.To confirm the validity of a suspected important factor
D.To provide a comparison of CTQs to root causes
Correct:C

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.9 In two months, there are 200 defects in 40 units processed. If each unit has 25 opportunities,
what is the process DPMO?
A.200,000
B.400,000
C.800,000
D.1,000,000
Correct:A

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.10 Which statement is a good guideline for brainstorming?
A.Keep the list of ideas manageable by allowing each participant a set number of contributions
B.Establish the objective prior to the brainstorming session
C.Focus on idea quality, rather than quantity
D.Provide a familiar venue for the process
Correct:B

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.11 A project charter should be:
A.Treated by the team as a fixed contract to be changed only by approval of 51% of the team
B.Treated as a living document which will evolve as new information is discovered
C.Written in precise technical language
D.A brief document 2-3 pages in length
Correct:B

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.12 Which statement guarantees no defects?
A.Z = 6 sigma
B.The part has been modified so that it physically cannot be put together incorrectly
C.All sampled data points are within the upper and lower specification
D.The data histogram is "centered"
Correct:B

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.13 CAP and DMAIC are useful together since:
A.The focus of DMAIC is collecting data and the focus of CAP is to make solutions more sustainable
B.The focus of CAP is collecting data and the focus DMAIC is influencing people to build acceptance
C.The focus of CAP is to find the best solution for a problem and the focus of DMAIC is to make solutions
sustainable
D.The focus of DMAIC is to find the best solution for a problem and the focus of CAP is to make solutions
sustainable
Correct:D

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.14 Which is NOT a key objective of "Mobilizing Commitment"?
A.Critical mass must be won over
B.Employees know exactly how their jobs will change
C.Key stakeholders support the change
D.Potential sources of resistance are identified
Correct:B

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.15 Which of the following are NOT common pitfalls to the Sun Shot process?
A.Multiple champions
B.Too little time allotted
C.Poor action item accountability
D.Weak sponsorship
Correct:A

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.16 What should be included in a good problem/opportunity statement?
A.A description of the causes of the problem
B.A statement of the project improvement goal
C.An assignment of responsibility for the problem
D.The severity of the problem
Correct:D

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.17 Which of the following is a continuous measure?
A.Total time required to close a deal
B.Count of the number of closed deals from new customers
C.Day of the week a deal is closed
D.Type of deal closed
Correct:A

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.18 What is the best use for the ANOVA test?
A.To complete a least squares regression fit for more than one data set
B.To determine if several samples belong to the same population relative to their mean
C.To determine the variance of a non-normal data set
D.To compare data set normality
Correct:B

SUN   310-600   310-600 examen   310-600   310-600 examen

NO.19 Which is the best tool to show a quantitative comparison of the frequency of occurrence for
different failure modes?
A.QFD
B.Individuals chart
C.Pareto chart
D.Scatter diagram
Correct:C

SUN   310-600   310-600 examen   310-600   310-600 examen

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test SUN 310-600, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

没有评论:

发表评论