Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test HP HP0-144 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test HP HP0-144 réel est lancée. C'est possible à réussir 100% avec le produit de HP HP0-144. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.
Pass4Test est un catalyseur de votre succès de test HP HP0-144. En visant la Certification de HP, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test HP HP0-144, la Q&A HP HP0-144 est un bon choix pour vous.
La Q&A HP HP0-144 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification HP HP0-144.
Le Certificat de HP HP0-144 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat HP HP0-144, c'est-à-dire avoir une grande fortune. Le Certificat HP HP0-144 peut bien tester des connaissances professionnelles IT. La Q&A HP HP0-144 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Code d'Examen: HP0-144
Nom d'Examen: HP (ProCurve Secure WAN)
Questions et réponses: 111 Q&As
Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test HP HP0-144, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test HP HP0-144 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat HP HP0-144 sans aucune doute.
HP0-144 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-144.html
NO.1 What is a disadvantage of dynamic routing?
A. Dynamic routing does not allow you to restrict which networks are included in routing tables.
B. Dynamic routing can consume bandwidth and CPU processes on the router.
C. Dynamic routing is less scalable than static routing.
D. Dynamic routing makes adding new networks to a WAN difficult.
Answer: B
certification HP HP0-144 HP0-144 certification HP0-144 HP0-144
NO.2 How many access control lists (ACLs) can you apply directly to one interface?
A. 1
B. 2
C. 5
D. unlimited number
Answer: B
HP examen HP0-144 examen HP0-144 examen HP0-144
NO.3 Which command allows you to use enable mode commands from any mode except basic mode?
A. the get command
B. the go command
C. the nomode command
D. the do command
Answer: D
HP HP0-144 examen HP0-144
NO.4 The status of the BRI interface is "connected." What does a connected status indicate?
A. The backup module is installed in the ProCurve Secure Router and is ready to be configured.
B. The BRI interface has been assigned to a primary connection.
C. The BRI interface is ready to provide a backup connection.
D. The BRI interface is currently providing a backup connection.
Answer: D
certification HP certification HP0-144 HP0-144
NO.5 Which interfaces can be configured as DHCP clients? Select TWO.
A. BRI interface
B. ADSL interface
C. ATM subinterface
D. Ethernet interface
E. Frame Relay interface
F. DSX-1 or G. 703 interface
Answer: CD
HP certification HP0-144 HP0-144 HP0-144 certification HP0-144
NO.6 How can you configure the ProCurve Secure Router so that a backup module does not establish a
backup connection with an unauthenticated peer?
A. Set the backup call mode so that the module cannot answer calls until the primary connection goes
down.
B. Configure PAP or CHAP on the backup interface.
C. Add an authentication, authorization, and accounting (AAA) list to the backup interface.
D. Add authenticated routers' hostnames to the global configuration mode database.
Answer: B
certification HP HP0-144 HP0-144 certification HP0-144 HP0-144 examen
NO.7 Which feature does the ProCurve Secure Router 7203dl provide that the ProCurve Secure Router
7102dl does not?
A. built-in encryption module
B. support for redundant power source (RPS)
C. one additional Ethernet port
D. support for up to 6 ADSL lines
Answer: B
HP certification HP0-144 HP0-144 certification HP0-144
NO.8 Which tasks can you use CompactFlash to complete? Select TWO.
A. Configure routers at remote sites.
B. Increase RAM on the router by configuring virtual memory.
C. Enter bootstrap mode.
D. Back up configuration files.
E. Enable IPSec security.
F. Store and view the Secure Router OS in an uncompressed format.
Answer: AD
HP HP0-144 HP0-144
NO.9 What must you do to configure Point-to-Point Protocol over Ethernet (PPPoE) for an Asymmetric
Digital Subscriber Line (ADSL)?
A. Configure and bind the ATM interface to the ADSL interface; then bind the ATM subinterface to a PPP
interface.
B. Configure a PPP interface; then bind the PPP interface to the ADSL interface.
C. Configure both an ATM interface and a PPP interface, and bind the ADSL interface to both virtual
interfaces.
D. Configure a PPPoE interface and bind it directly to the ADSL interface.
Answer: A
HP certification HP0-144 certification HP0-144 HP0-144 examen certification HP0-144 HP0-144
NO.10 The Asymmetric Digital Subscriber Line (ADSL) keeps going into training mode. What is causing this
problem?
A. The signaling type configured for the router does not match the signaling type used by the service
provider.
B. The encapsulation type configured for the router does not match the type used by the service provider.
C. The signal-to-noise (SNR) margin configured for the router is too high.
D. The ADSL interface has not been assigned an IP address.
Answer: C
HP certification HP0-144 certification HP0-144 HP0-144
NO.11 You have configured an Integrated Services Digital Network (ISDN) backup for your organization's
Frame Relay connection. When this connection goes down, which virtual interface could establish and
maintain the backup connection?
A. a backup Asynchronous Transfer Mode (ATM) interface
B. a backup Frame Relay interface
C. a backup Point-to-Point Protocol (PPP) interface
D. a backup BRI ISDN interface
Answer: C
HP HP0-144 certification HP0-144 HP0-144 certification HP0-144
NO.12 Which Quality of Service (QoS) features does the ProCurve Secure Router support? Select TWO.
A. custom queuing
B. low latency queuing (LLQ)
C. weighted fair queuing (WFQ)
D. generic traffic shaping (GTS)
E. Frame Relay traffic shaping (FRTS)
Answer: BC
certification HP HP0-144 HP0-144 HP0-144 examen certification HP0-144 HP0-144
NO.13 Which function does the virtual path identifier/virtual channel identifier (VPI/VCI) perform?
A. It identifies the endpoint for an Asynchronous Transfer Mode (ATM) connection.
B. It identifies the tunnel endpoint for virtual private network (VPN) peers.
C. It identifies the permanent virtual circuit (PVC) in a Frame Relay network.
D. It defines each peer in a Point-to-Point Protocol (PPP) connection, if authentication is configured.
Answer: A
HP examen HP0-144 HP0-144 examen HP0-144 examen HP0-144 examen
NO.14 Which steps must you complete to enable access to the ProCurve Secure Router's web interface?
Select TWO.
A. Enable the ftp server.
B. Enable the http server.
C. Configure a Telnet password.
D. Configure an enable mode password.
E. Configure a username and password.
F. Configure an ACL permitting FTP traffic.
Answer: BE
HP HP0-144 HP0-144 certification HP0-144 certification HP0-144
NO.15 When you are configuring an Asymmetric Digital Subscriber Line (ADSL), what is the purpose of
training mode?
A. ADSL is dependent upon line quality; ADSL devices must determine the best way to use the line.
B. ADSL devices always negotiate the signaling standard used, based on the type of DSLAM used by the
public carrier.
C. The ADSL device and the DSLAM must identify the fastest switched virtual circuit (SVC) available.
D. The training mode is essentially a testing phase to determine if the ADSL module itself is working
correctly.
Answer: A
HP examen HP0-144 HP0-144 certification HP0-144
NO.16 Before the ProCurve Secure Router and the DSL Access Multiplexer (DSLAM) exchange
Asynchronous Transfer Mode (ATM) cells, they utilize physical-layer signaling to establish an Asymmetric
DSL (ADSL) connection. Which monitor evaluates the signal-to-noise ratio (SNR) margin while the router
and the DSLAM establish the physical ADSL connection?
A. ADSL monitor
B. showtime monitor
C. phase 1 monitor
D. training monitor
Answer: D
certification HP HP0-144 certification HP0-144 certification HP0-144
NO.17 Click the Exhibit button.
You want your ProCurve Secure Router to act as a gateway device for any remote VPN client who
initiates IKE in its most secure mode. Which policy shown contains the correct configurations for this
use?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
G. 7
Answer: C
certification HP HP0-144 HP0-144 HP0-144 HP0-144 HP0-144
NO.18 What determines the number of Asynchronous Transfer Mode (ATM) subinterfaces you configure for
an Asymmetric Digital Subscriber Line (ADSL) connection?
A. the number of LANs you want to connect to the Internet
B. the number of access control lists (ACLs) you want to apply to the ADSL interface
C. the amount of bandwidth you want to reserve for upstream and downstream transmissions
D. the number of virtual circuits you want to establish
Answer: D
certification HP HP0-144 HP0-144 HP0-144
NO.19 Which type of connection may be used for the backup modules on the ProCurve Secure Router?
A. Asymmetric Digital Subscriber Line (ADSL)2+, Annex A or Annex B
B. T1 or E1 connections
C. Integrated Services Digital Network (ISDN) connection
D. Asynchronous Transfer Mode (ATM) connection
Answer: C
HP HP0-144 HP0-144 HP0-144 examen certification HP0-144
NO.20 Which type of firewall monitors traffic on several layers of the Open Systems Interconnection (OSI)
model?
A. packet-filtering firewall
B. circuit-level gateway
C. application-level gateway
D. stateful-inspection firewall
Answer: D
HP HP0-144 examen HP0-144 HP0-144 HP0-144
En quelques années, le test de certification de HP HP0-144 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de HP HP0-144? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification HP0-144. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification HP0-144, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.
没有评论:
发表评论