Adobe 9A0-080 examen pratique questions et réponses

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Adobe 9A0-080. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Adobe 9A0-080. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Adobe 9A0-080, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Adobe 9A0-080 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Adobe 9A0-080 sans aucune doute.

On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Adobe 9A0-080. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.

La population de la Certification Adobe 9A0-080 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

Code d'Examen: 9A0-080
Nom d'Examen: Adobe (Adobe Captivate 3 ACE Exam)
Questions et réponses: 92 Q&As

9A0-080 Démo gratuit à télécharger: http://www.pass4test.fr/9A0-080.html

NO.1 You are publishing your Captivate project to Flash (SWF). Which option, if deselected, may cause
your project to NOT display properly in a Web browser?
A.Zip files
B.Export HTML
C.Full screen
D.Send PENS notification
Answer: B

Adobe   9A0-080 examen   9A0-080 examen   certification 9A0-080   9A0-080

NO.2 You publish your Captivate project as standalone. Later, you want to change the title bar.What should
you do?
A.Choose Edit > Preferences > General and change the Project name field.
B.Choose Project > Skin, select the Info tab and change the Project name field.
C.Edit the properties of the first slide and configure the Label field.
D.Choose File > Publish > Standalone and configure the Project Title field.
Answer: D

Adobe examen   9A0-080   9A0-080 examen   certification 9A0-080

NO.3 Your users do NOT have access to the Flash player. Which publish option should you use to ensure
your users can view your published project?
A.Adobe Connect
B.Print
C.Flash (SWF)
D.Standalone
Answer: B

Adobe   9A0-080   9A0-080   9A0-080   certification 9A0-080

NO.4 You want to create a demo that will be delivered as a single Flash.swf file. Which recording preference
produces extra.swf files?
A.record keystrokes
B.hear camera sounds during recording
C.automatically use full motion recording
D.record in demonstration mode
Answer: C

Adobe   9A0-080   9A0-080   certification 9A0-080

NO.5 You intend to capture a desktop application. You have been told by the software developer that you
may NOT resize the applications window and that you must capture it at its default window size. Youve
started the
application.
Which Software Simulation option will ensure you capture just the application window at its current size?
A.Application
B.Custom Size
C.Full Screen
D.Scenario Simulation
Answer: A

Adobe   9A0-080   9A0-080   9A0-080 examen   9A0-080   9A0-080 examen

NO.6 You want to record an application so the Captivate movie contains the following settings after you
record:
- Click Boxes with Failure and Hint Captions
- Text Entry Boxes with Failure and Hint Captions and two attempts
Which recording option should you choose?
A.Demonstration
B.Assessment Simulation
C.Training Simulation
D.Custom
Answer: C

certification Adobe   certification 9A0-080   certification 9A0-080   9A0-080

NO.7 You want to add closed captioning text to your slides. What should you do?
A.Choose BMP playbars for the Skin property in the Skin Editor dialog box.
B.Choose Audio > Advanced Audio, click on an audio track, click the Closed Caption button and add a
caption.
C.Choose Project > Skin and deselect Show playback control in the Playback Control tab of the Skin
Editor dialog box
D.Add closed captioning text to slide notes
Answer: B

Adobe examen   certification 9A0-080   9A0-080 examen

NO.8 You want to publish your project as a SWF so it can be viewed over the Web via a Web browser. You do
NOT want your screen captures to be too wide or tall.
Which Software Simulation option will allow you to control the size of the capture area?
A.Application
B.Custom Size
C.Full Screen
D.Scenario Simulation
Answer: B

Adobe   certification 9A0-080   9A0-080   9A0-080 examen   9A0-080

NO.9 You have created a Captivate project and are preparing to add some audio narration to your text
captions. You want to ensure that the audio will synchronize with the text captions.What should you do?
A.Choose Audio > Background Audio and record the audio narration.
B.Choose Audio > Record > Project and record the audio narration.
C.Edit the properties for each text caption, choose the Audio tab and record the audio.
D.Choose Audio > Import and import a placeholder audio clip.
Answer: C

certification Adobe   9A0-080   9A0-080   9A0-080   9A0-080

NO.10 Captivate may be configured to record specific areas of the screen using the size you specify. Your
computer has been configured with a screen resolution of 1280 pixels by 800 pixels.
You will be placing your Captivate output on the Internet. You do NOT know which screen settings your
end users may have.
What should you do?
A.change your screen resolution to 640 x 480 pixels and record using the full screen option of Captivate
B.change your screen resolution to 1024 x 768 pixels and record the application at whatever size it
currently is displaying
C.configure the application to display at 1024 x 768 pixels and record using this size
D.configure the application to display at 800 x 600 pixels and record using this size
Answer: D

certification Adobe   9A0-080   certification 9A0-080   9A0-080 examen

NO.11 Which statement about project titles is NOT true?
A.Spaces in the project title are acceptable.
B.Underscores in the project title are acceptable.
C.Project titles longer than 8 characters are acceptable.
D.Project titles result in the HTML file name.
Answer: A

Adobe examen   9A0-080   certification 9A0-080   9A0-080   9A0-080

NO.12 Click the Exhibit button.
After publishing a Captivate project as a standalone and distributing on CD, you receive reports that the
CD does NOT automatically present the Captivate movie after being inserted in a PC.
Based on the exhibit, what are two reasons for this behavior? (Choose two.)
A.eLearning output needs to be enabled.
B.The Full screen option needs to be deselected.
C.The Flash Player Version needs to be changed.
D.The Generate autorun for CD option needs to be selected.
E.The Project Title is too long and needs to be shortened to 8 characters or less.
Answer: DE

certification Adobe   certification 9A0-080   9A0-080   9A0-080 examen

NO.13 You will be deploying your Adobe Captivate movie in a Web browser to a broad audience. Users will
have a low bandwidth connection and video quality will have to be set to Standard.
Which Windows display setting should you choose to provide the best graphic appearance?
A.set the Windows display color quality to 32-bit
B.use a blank screen saver
C.turn off gradients in Active and Inactive Title bars
D.eliminate icons on desktop
Answer: C

Adobe   9A0-080   9A0-080   9A0-080   9A0-080   9A0-080

NO.14 You are publishing your Captivate project as a Word document. You want to provide your questions
and an answer key. Which output type should you choose?
A.Handouts
B.Step by Step
C.Lesson
D.Storyboard
Answer: C

Adobe   certification 9A0-080   9A0-080 examen

NO.15 You want to publish your Captivate project as a short reference guide by creating a Microsoft Word
document.
Which output type should you choose?
A.Handouts
B.Step by Step
C.Lesson
D.Storyboard
Answer: B

Adobe   certification 9A0-080   9A0-080   9A0-080

NO.16 You are creating a new Captivate project. You want to use the Cosmos caption type in your project. The
Cosmos caption type was available in the drop down list in version 2, but is NOT available version 3.
What should you do?
A.Locate a PC with Captivate 2 still installed, then locate the Cosmos caption files and copy them from
the Captivate 2 PC to the Captivate 3 PC.
B.When editing the caption within Captivate, choose the Caption Type drop down, choose and open the
More folder.
C.Use a graphics editing application to re-create the look and feel of the Cosmos caption type.
D.Advise those involved in the decision making that this caption type is NO longer included with Captivate

NO.17 and it should no longer be used.
Answer: B

Adobe   9A0-080   9A0-080   certification 9A0-080   certification 9A0-080
3. You have created a text entry box to receive answers from users. You also want users to see their
previously entered answer if they return to this slide by using the Back button. What should you do?
A.Add responses to the Correct entries section.
B.Select Retain Text.
C.Select Infinite attempts.
D.Leave the Default text field blank
Answer: B

Adobe examen   certification 9A0-080   9A0-080

NO.18 You want to realistically record the time it takes for a process to complete during the recording process.
Which Recording setting should you use?
A.Auto Recording.
B.Record keystrokes.
C.Record actions in real time.
D.Manual Recording.
Answer: C

certification Adobe   certification 9A0-080   9A0-080 examen

NO.19 You will be recording in Assessment mode. Which recording preference option is selected by default?
A.Automatically add click boxes when the mouse is clicked
B.Show mouse location and movement
C.Automatically add text captions
D.Convert tooltips to rollover captions
Answer: A

Adobe   9A0-080 examen   9A0-080   9A0-080 examen   certification 9A0-080

NO.20 You are about to record a simulation. You want to provide Hint captions automatically by default. Which
option should you select?
A.Assessment Simulation
B.Demonstration
C.Training Simulation
D.Custom
Answer: C

certification Adobe   9A0-080 examen   9A0-080   9A0-080   9A0-080

Le test Adobe 9A0-080 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.

Guide de formation plus récente de Adobe 9A0-019

On peut voir que beaucoup de candidats ratent le test Adobe 9A0-019 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Adobe 9A0-019 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Adobe 9A0-019, Pass4Test peut offrir les Q&As des autres test Certification IT.

La Q&A de Pass4Test vise au test Certificat Adobe 9A0-019. L'outil de formation Adobe 9A0-019 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.

Code d'Examen: 9A0-019
Nom d'Examen: Adobe (Adobe Photoshop 6.0 Product Proficiency)
Questions et réponses: 115 Q&As

Vous Adobe 9A0-019 pouvez télécharger le démo Adobe 9A0-019 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.

Si vous vous inscriez le test Adobe 9A0-019, vous devez choisir une bonne Q&A. Le test Adobe 9A0-019 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.

9A0-019 Démo gratuit à télécharger: http://www.pass4test.fr/9A0-019.html

NO.1 A layer contains a shape filled with a solid color. You want to fill the shape with a gradient. What should
you do?
A. select the shape layer and choose a gradient from the Swatches palette.
B. Select the gradient tool from the toolbox. select a gradient from the options bar, and drag the gradient
tool across the shape
C. Select the shape layer; click the Layer Style button on the Layers palette and select
Gradient Overly; choose a gradient and click OK
D. Select the shape layer; click the New Adjustment Layer button on the Layers palette and select
Gradient Map. choose a gradient and click OK
Answer: C

Adobe   certification 9A0-019   9A0-019 examen   9A0-019

NO.2 Which format supports layers in Adobe Photoshop?
A. JPG
B. TIFF
C. PICT
D. EPS
Answer: B

certification Adobe   certification 9A0-019   9A0-019

NO.3 You make a selection by using the magnetic lasso tool you want modify the selection. Which tool or
tools can you use to modify the selection?
A. any selection tool
B. only the magnetic lasso
C. lasso, magnetic lasso or polygonal lasso
D. any selection tool except the magic wand
Answer: A

Adobe   9A0-019   9A0-019   9A0-019 examen   9A0-019

NO.4 Which command or tool effects all linked layers?
A. Paintbrush
B. Distort Filter
C. Free Transform
D. Levels Adjustment
Answer: C

Adobe examen   9A0-019   9A0-019 examen   9A0-019   9A0-019 examen

NO.5 What are two methods to create custom layer styles? (Choose two.)
A. choose the Layer Properties dialog box
B. choose Layer>Layer Style>Copy Layer Style
C. select New Style in the Layer Styles dialog box
D. select the Create New Style button on the Style Palette
Answer: CD

certification Adobe   certification 9A0-019   certification 9A0-019

NO.6 Which command converts a selection into a new layer?
A. Copy Merged
B. Layer Via Copy
C. New Adjustment Layer
D. Layer from Background
Answer: B

Adobe examen   9A0-019   certification 9A0-019   9A0-019 examen

NO.7 If you are working in a two-layer document, how should you make the top layer display only where it
overlaps the content of the low layer.
A. link the layers
B. make a clipping group
C. link the layers and select Merge Linked
D. turn Preserve Transparency for the top layer
Answer: B

Adobe examen   9A0-019   9A0-019 examen   9A0-019 examen

NO.8 You want to randomly display7% of the pixels on a layer. What should you do? A. set the layer opacity
to7% and the layer's blending mode to Dissolve
B. set the layer opacity to7% and the layer's blending mode to Difference
C. apply the Pointillize file then choose the Fade command with7% opacity
D. apply the Fragment filter then choose the Fade command with7% opacity
Answer: A

Adobe   certification 9A0-019   9A0-019

NO.9 Exhibit.
You create a type layer and a fill layer with a pattern. You want the type to act as a mask so that the
pattern appears only where there is type on the type layer. What should you do?
A. position the type layer above the fill layer. with the type layer active, choose
Layer>Merge Down
B. position the type layer below the fill layer. with the fill layer active, choose
Layer>Merge Down
C. position the type layer below the fill layer, with the fill layer active, choose
Layer>Group with Previous
D. position the type flayer above the fill layer, with the type layer active, choose
Layer>Group with Previous
Answer: C

Adobe examen   certification 9A0-019   9A0-019   certification 9A0-019

NO.10 Which file format supports spot color channel?
A. PICT
B. JPEG
C. Gif89a
D. DCS 2.0
Answer: D

Adobe   certification 9A0-019   9A0-019   9A0-019   9A0-019

NO.11 Which blending mode should you use to create a drop shadow?
A. Multiply
B. Dissolve
C. Difference
D. Color Burn
Answer: A

Adobe   certification 9A0-019   certification 9A0-019

NO.12 You want to make certain areas of a completely opaque layer partially transparent. You have added a
new layer mask. What should you do?
A. paint with black
B. paint with a shade of gray
C. change the opacity of the layer
D. change the opacity of the layer mask
Answer: B

Adobe examen   9A0-019   9A0-019   9A0-019

NO.13 You make a selection with the polygon lasso tool. When a color fill is applied, the edg appears rough.
Which tool option should have been selected to soften the selection edg.
A. Blur
B. Border
C. Smooth
D. Anti-Alised
Answer: D

Adobe   9A0-019 examen   9A0-019 examen

NO.14 Exhibit.
You have clicked the Lock image pixels checkbox in the Layers palette. Which action are you
PREVENTED from doing?
A. changing the blending mode
B. changing the shape of the clipping path
C. using the painting tool to modify the layer mask
D. using the history brush to paint back form an earlier state
Answer: D

Adobe   9A0-019   9A0-019

NO.15 You are making selection by using the elliptical marquee. The value for Feather is set10 pixels. When
would you see the effect of the feathering option?
A. When you deselect
B. When you choose Select>Feather
C. When you move the selected pixels
D. As soon as you finish making the selection
Answer: C

Adobe   9A0-019 examen   9A0-019   certification 9A0-019   9A0-019 examen

NO.16 What is the most efficient thod to isolate a complex object form is background?
A. create a layer mask
B. create an alpha channel
C. use the Extract Image command
D. use the lasso tool to create a selection
Answer: C

certification Adobe   9A0-019   9A0-019 examen   9A0-019   9A0-019 examen

NO.17 You have created an action that you want to run on a folder of images. Which destination option within
the Batch command saves the files to a new location and leaves the originals untouched?
A. None
B. Folder
C. Import
D. Save and Close
Answer: B

Adobe examen   9A0-019   9A0-019   9A0-019 examen

NO.18 Exhibit.
You want to create the hard and soft edge around an image. What area the red arrows indicating in the
Zebra layer on the Layers. Palette? (Choose two.)
A. a layer mask
B. a clipping group
C. an adjustment layer
D. a layer clipping path
Answer: AD

Adobe   9A0-019   9A0-019 examen

NO.19 When creating animations in Adobe ImageReady, what does the Tween feature do?
A. It specifies looping for playback.
B. It specifies repeat options for playback.
C. It adds a series of layers between existing layers.
D. It adds a series of frames between existing frames.
Answer: D

Adobe   certification 9A0-019   9A0-019   9A0-019

NO.20 You are working in a layered Photoshop document. You add an adjustment layer. Which layer will be
affected by the adjustment layer?
A. layers above the adjustment layer
B. layer below the adjustment layer
C. only layers included in the same layer set
D. only layers linked with the adjustment layer
Answer: B

Adobe   9A0-019   9A0-019 examen   9A0-019

Un bon choix de l'outil à se former est le point essentiel à passer le test Adobe 9A0-019, et les documentations à propos de rechercher le test Adobe 9A0-019 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

Pass4Test offre de Adobe 9A0-095 matériaux d'essai

Pour vous laisser savoir mieux que la Q&A Adobe 9A0-095 produit par Pass4Test est persuadante, le démo de Q&A Adobe 9A0-095 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Adobe 9A0-095 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.

Pass4Test vous promet de vous aider à passer le test Adobe 9A0-095, vous pouvez télécharger maintenant les Q&As partielles de test Adobe 9A0-095 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Code d'Examen: 9A0-095
Nom d'Examen: Adobe (Adobe Photoshop CS4 Recertification Exam)
Questions et réponses: 123 Q&As

Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Adobe 9A0-095 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Adobe 9A0-095 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Adobe 9A0-095. Votre argent sera tout rendu si vous échouez le test.

Selon les anciens test Adobe 9A0-095, la Q&A offerte par Pass4Test est bien liée avec le test réel.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Adobe 9A0-095, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Adobe 9A0-095 coûtant un peu d'argent.

9A0-095 Démo gratuit à télécharger: http://www.pass4test.fr/9A0-095.html

NO.1 You want to highlight certain menu items in color. What should you do?
A. Choose Preferences > Interface > Show Channels in Color
B. Choose Preferences > Interface > Show Tool Tips
C. Choose Edit > Keyboard Shortcuts and use the Keyboard Shortcuts tab
D. Choose Edit > Menus and use the Menus tab
Answer: D

certification Adobe   9A0-095   certification 9A0-095   9A0-095   9A0-095

NO.2 You choose View > Proof Colors and preview how colors will print on a specific printer. What is a
requirement for Proof Colors to work properly?
A. You have chosen Edit > Assign Profile to assign the profile for the printer's color space
B. You have chosen Edit > Convert to Profile to convert the document into the printer's color space
C. You have also turned on View > Gamut Warning
D. You have configured the Customize Proof Condition dialog box
Answer: D

Adobe   9A0-095   9A0-095

NO.3 You have a 12-megapixel digital camera image and you want to reduce its size for a Web page where
the image is required to be 400 pixels wide (with no height restriction). You want to edit the image further
as a layered Photoshop file, so it must remain in Photoshop format after resizing. What is the best way to
resize the entire image to the requirements above?
A. Choose Image > Canvas Size, and in the New Size section set Width to 400 pixels
B. Choose File > Save for Web & Devices, and set W: to 400px
C. Choose Image > Image Size, deselect Resample Image, and set Resolution to 72ppi
D. Choose Image > Image Size,select Resample Image, and set Pixel Dimensions: Width to 400 pixels
Answer: D

Adobe examen   9A0-095 examen   9A0-095   9A0-095 examen   9A0-095

NO.4 Which file format can store the original Camera Raw file and image data from a digital camera?
A. Cineon format
B. OpenEXR format
C. Digital Negative format (DNG)
D. Large Document Format (PSB)
Answer: C

Adobe   9A0-095 examen   9A0-095 examen   9A0-095   certification 9A0-095

NO.5 You are working with an HDR image and you want to use a Photoshop filter that does NOT work with
an HDR image. What should you do?
A. Convert the image to 32 Bits/Channel
B. Convert the image to 16 Bits/Channel
C. Convert to LAB color mode at 32 Bits/Channel
D. Convert to Multichannel mode at 16 Bits/Channel
Answer: B

Adobe   9A0-095   9A0-095   9A0-095   9A0-095

NO.6 Which two actions will display your image at 100%? (Choose two) Select all that apply.
A. Choose View > Actual Pixels.
B. Double-click the Zoom tool in the toolbox.
C. Double-click the Hand tool in the toolbox.
D. Press Ctrl-0 (Windows) or Command-0 (Mac OS).
E. With the Zoom tool selected, click the Print Size button in the options bar.
Answer: A,B

Adobe   certification 9A0-095   9A0-095   9A0-095   certification 9A0-095

NO.7 You want to prepare an image for the Web that includes reducing the image resolution. Which
resample method is recommended as best for reduction?
A. Bilinear
B. Bicubic Sharper
C. Nearest Neighbor
D. Bicubic Smoother
Answer: B

Adobe examen   9A0-095   certification 9A0-095   9A0-095 examen

NO.8 You have a document using the Adobe RGB (1998) color space, and you need to convert it to a smaller
CMYK color space represented by a press profile. The document contains no significant colors that are
outside the CMYK color space. Which rendering intent will most effectively preserve the color
relationships within the RGB document when it's converted to CMYK?
A. Absolute Colorimetric
B. RelativeColormetric
C. Perceptual
D. Saturation
Answer: B

certification Adobe   9A0-095 examen   9A0-095   9A0-095 examen   9A0-095 examen   9A0-095

NO.9 You have a grayscale image that you would like to print. You would like to add a color tint and print the
image on two separate plates. Which should you choose?
A. Image > Mode > Indexed Color
B. Image > Mode > RGB Color
C. Image > Mode > CMYK Color
D. Image > Mode > Duotone
Answer: D

Adobe   9A0-095   9A0-095   9A0-095   9A0-095   certification 9A0-095

NO.10 You want to dock a panel group under another existing panel on the right side of your screen. Which
area of the panel group must you drag in order to dock the entire panel group?***Exhibit Missing***
A. A
B. B
C. C
D. D
Answer: B

Adobe   9A0-095   9A0-095

NO.11 You are using the Merge to HDR command to combine several images. Which Bit Depth will support
the full range of luminance values of an HDR image?
A. 8 Bit/Channel
B. 16 Bit/Channel
C. 24 Bit/Channel
D. 32 Bit/Channel
Answer: D

Adobe examen   9A0-095   9A0-095   9A0-095

NO.12 You have finished editing an image acquired from a digital camera. Which command should you choose
to change the current image mode to one that is appropriate for preparing an image to be printed using
process colors?
A. Image > Mode > CMYK
B. Image > Mode > Lab Color
C. Image > Mode > RGB Color
D. Image > Mode > Indexed Color
Answer: A

Adobe   9A0-095   9A0-095 examen   9A0-095

NO.13 You have four images open in Photoshop. You currently see each image in its own separate window
with its own title bar. You would like to see just one image and tabs for the other images. Which should
you choose?
A. Window > Arrange > Float in Window
B. Window > Arrange > Float All in Windows
C. Click the 4-up button in the Arrange Documents menu
D. Click the Consolidate All button in the Arrange Documents menu
Answer: D

Adobe   9A0-095 examen   9A0-095 examen   9A0-095   certification 9A0-095   9A0-095

NO.14 You are configuring the Color Settings dialog box for images intended for output to the Web. Which
RGB working space should you choose?
A. sRGB
B. ProPhoto RGB
C. Adobe RGB
D. ColorMatch RGB
Answer: A

Adobe examen   certification 9A0-095   9A0-095   certification 9A0-095   9A0-095 examen

NO.15 You want to display an on-screen preview of how your RGB document will look when produced in
CMYK. Which should you choose to specify the device to simulate?
A. View > Proof Setup
B. View > Proof Colors
C. Image > Mode > CMYK Color
D. Image > Mode > Multichannel
Answer: A

certification Adobe   9A0-095   certification 9A0-095   certification 9A0-095

NO.16 In the Photoshop Color Settings dialog box you see a warning that says: Your Creative Suite
applications are not synchronized for consistent color. You want consistent color treatment across
Photoshop, Illustrator, Acrobat, and InDesign. What should you do?
A. From the Settings list choose: Monitor Color
B. From the Settings list choose: Custom
C. In Bridge, choose Edit > Creative Suite Color Settings and apply a color setting
D. In Bridge, choose Preferences > Advanced and check the box to Use Software Rendering
Answer: C

Adobe   9A0-095 examen   certification 9A0-095   9A0-095

NO.17 On the Mac OS, which should you choose to group all the workspace elements in a single, integrated
window?
A. View > Show > None
B. Window > Application Frame
C. Window > Workspace > Basic
D. View > Screen Mode > Standard Screen Mode
Answer: B

Adobe   9A0-095   9A0-095   certification 9A0-095

NO.18 You want to add metadata to a JPEG file that will be used on the Web. Where should you enter the
copyright information for that file?
A. File > Scripts > Statistics
B. File > Import > Annotations
C. File > File Info and select the Description tab
D. File > Save for Web & Devices and select from the Metadata list
Answer: C

Adobe   9A0-095 examen   certification 9A0-095   certification 9A0-095

NO.19 You have selected the Zoom tool. What happens when you hold down the H key and click in the image
and hold down the mouse button?
A. Your image zoom changes temporarily
B. You see an animated zoom continuously zooming into an image
C. You see a synchronized zooming in of multiple images that are tiled
D. You zoom into an image while increasing the window size to accommodate the enlarged image
Answer: A

Adobe examen   9A0-095   9A0-095 examen

NO.20 Which file format supports transparency in a Web browser?
A. GIF
B. PSD
C. TIFF
D. JPEG
Answer: A

Adobe examen   certification 9A0-095   9A0-095   9A0-095

Vous allez choisir Pass4Test après essayer une partie de Q&A Adobe 9A0-095 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Adobe 9A0-095.

Dernières Autodesk MAYA11.A de la pratique de l'examen questions et réponses téléchargement gratuit

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Autodesk MAYA11.A, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Si vous faites toujours la lutte contre le test Autodesk MAYA11.A, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Autodesk MAYA11.A. Si vous avez déjà décidé à s'améliorer via Autodesk MAYA11.A, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Il y a nombreux façons à vous aider à réussir le test Autodesk MAYA11.A. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test Autodesk MAYA11.A est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test Autodesk MAYA11.A peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Autodesk MAYA11.A. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Pass4Test est un catalyseur de votre succès de test Autodesk MAYA11.A. En visant la Certification de Autodesk, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Autodesk MAYA11.A, la Q&A Autodesk MAYA11.A est un bon choix pour vous.

Code d'Examen: MAYA11.A
Nom d'Examen: Autodesk (Maya 2011 Certified Associate)
Questions et réponses: 30 Q&As

Il y a plusieurs de façons pour réussir le test Autodesk MAYA11.A, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

MAYA11.A Démo gratuit à télécharger: http://www.pass4test.fr/MAYA11.A.html

Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification Autodesk MAYA11.A, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.

Le meilleur matériel de formation examen IFPUG AFE

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test IFPUG AFE.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification IFPUG AFE.

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification IFPUG AFE. Il n'y a pas de soucis à réussir le test avec une haute note.

Code d'Examen: AFE
Nom d'Examen: IFPUG (Accredited Financial Examiner (AFE))
Questions et réponses: 286 Q&As

Pass4Test est un seul site de provider le guide d'étude IFPUG AFE de qualité. Peut-être que vous voyiez aussi les Q&A IFPUG AFE dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

AFE Démo gratuit à télécharger: http://www.pass4test.fr/AFE.html

NO.1 A
is an amount of money, loaned at interest for a specified term, secured
by real estate and by its improvements such as buildings and infrastructure. This form of
instrument itself varies by jurisdiction, but the debt is always evidenced by an
accompanying promissory note.
A. Mortgage Loan
B. Real estate lending
C. Conventional Commercial Loans
D. CMBS
Answer: A

IFPUG   AFE   certification AFE

NO.2 These are securities whose underlying assets consist of commercial mortgage loans. The
commercial loans are pooled, which brings diversification and liquidity to the asset class.
What are these?
A. Conventional securities
B. CMBS
C. Subordinated securities
D. Securitization
Answer: B

certification IFPUG   certification AFE   certification AFE

NO.3 Many companies have developed an asset/liability management approach that is founded
on understanding product liabilities. Mortgages meet the primary objective of
maintaining:
A. A tight asset/liability match
B. A well-diversified core of investments
C. A tight asset/liability match with a well-diversified core of investments.
D. Real estate lending by insurance companies
Answer: C

IFPUG examen   AFE   AFE   AFE

NO.4 Prepayment of a conventional mortgage loan, prior to its specified maturity, is
discouraged through the general market acceptance of significant prepayment penalties.
Often these penalties are calculated so that when prevailing market interest rates are:
A. Lower than the rate on the loan being repaid the borrower has to make up the interest
rate differential and the lender is essentially “made whole” for a potential loss of interest.
B. Greater than the rate on the loan being repaid the borrower has to make up the interest
rate differential and the lender is essentially “made whole” for a potential loss of interest.
C. Equal to the rate on the loan being repaid the borrower has to make up the interest rate
differential and the lender is essentially “made whole” for a potential loss of interest.
D. Lower than the rate of interest being paid to the borrower has to make up the interest
rate differential and the lender is essentially “made whole” for a potential loss of interest.
Answer: A

IFPUG   AFE examen   AFE   certification AFE

NO.5 There are many different sources of CMBS. Conduits and aggregate pools generally
consist of loans newly originated, purchased or held by investment bankers until the pool
is large enough for an efficient execution. Government agencies such as the Federal
National Mortgage Association (FNMA) and the Federal Home Loan Mortgage Corp.
(FHLMC) are important sources of:
A. Residential financing
B. B2B financing.
C. Commercial financing.
D. Mortgage loans
Answer: A

IFPUG   AFE examen   certification AFE   AFE

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A IFPUG AFE dans Pass4Test pour se former avant le test IFPUG AFE.

Le meilleur matériel de formation examen Riverbed 299-01

Est-que vous s'inquiétez encore à passer le test Certification 299-01 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Riverbed 299-01? Si vous voulez réussir le test Riverbed 299-01 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Riverbed 299-01 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Riverbed 299-01 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Riverbed 299-01.

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.

Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Riverbed 299-01 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Riverbed 299-01 qui vous amenera le succès du test Riverbed 299-01, au lieu de traivailler avec peine et sans résultat.

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Riverbed 299-01 à la première fois.

Code d'Examen: 299-01
Nom d'Examen: Riverbed (Riverbed Certified Solutions Professional - Network Performance Management)
Questions et réponses: 245 Q&As

299-01 Démo gratuit à télécharger: http://www.pass4test.fr/299-01.html

NO.1 How do Cascade Performance Analytics assist with Performance Monitoring?
A. By setting intelligent static thresholds for Application metrics and Interface metrics, tolerance can
be
determined. Cascade will use these thresholds and tolerances to report on deviations indicative of
performance problems.
B. The Customer only needs to identify their critical hosts, interfaces and/or applications, and
Cascade
will automatically baseline their behavior and report on deviations indicative of performance
problems.
C. The Performance Analytics use knowledge of hosts, interfaces, and/or applications are able to
detect
security threats such as host scans and worms.
D. After baselining is completed, Cascade can re-route congested traffic to avoid congested
application
delivery paths.
Answer: B

Riverbed examen   299-01 examen   certification 299-01   certification 299-01   299-01

NO.2 Which of the following configuration changes can be used to reduce the number of alerts
generated overall for a Service?
A. Edit each Service policy to increase the Tolerance slider for Low and High alerts.
B. Edit each Service policy and set a noise floor to specify the minimum amount of change that the
policy
can treat as deviation from normalbehavior.
C. Edit the Service and select fewer metrics to monitor for each segment that comprises the Service.
D. Modify the location host group type used for monitoring end user traffic to use fewer groups (for
example, Region instead of Site).
E. A, B, C, and D.
F. A and B only.
Answer: E

Riverbed   299-01   299-01   299-01 examen   299-01   certification 299-01

NO.3 Within Cascade Pilot, to analyze the round-trip time in a trace file, you can:
A. Ask Riverbed Support to send you the proper View to use.
B. Open the View folders in Cascade Pilot to look for a View named "Round-trip time".
C. Use the View search box and enter "round".
D. Use the Help menu and search for round.
Answer: C

Riverbed   299-01   299-01   299-01   certification 299-01

NO.4 Which of the following statements is true regarding SNMP polling and NTP syncing among
Cascade components?
A. Cascade Gateway's poll via SNMP sources of Netflow, while Cascade Profiler, Cascade Gateway
and
Cascade Sensor sync NTP from a common source.
B. Cascade Profiler's poll via SNMP sources of Netflow, while Cascade Profiler, Cascade Gateway and
Cascade Sensor sync NTP from a common source.
C. Cascade Profiler, Cascade Gateway and Cascade Sensor sync NTP from different sources, while
Cascade Profiler's poll via SNMP sources of Netflow.
D. Cascade Profiler, Cascade Gateway and Cascade Sensor sync NTP from different sources, while
Cascade Gateway's poll via SNMP sources of Netflow.
E. Cascade Profiler does all SNMP polling and is also the source of all NTP.
Answer: D

Riverbed   299-01   299-01 examen   299-01   299-01

NO.5 Cascade Profiler's Switch Integration feature uses SNMP and adds the capability for Cascade
to report on which of the following. (Select 2)
A. User name
B. Host IP address
C. Host MAC address
D. The physical switch port a specific host is connected to
E. Switch port traffic levels
F. Switch port status
G. SNMP traps from the switch
Answer: C,D

Riverbed examen   299-01   299-01 examen

NO.6 Quality of Service information is obtained from what Cascade sources?
A. Cascade Sensor only
B. Cannot get QoS data on Cascade
C. Cascade Sensor and Cascade Gateway
D. CascadeFlow traffic only
E. NetFlow and IPFIX traffic only
Answer: C

certification Riverbed   299-01   299-01   299-01

NO.7 What is the relationship between a Host Group and a Host Group Type in Cascade Profiler?
A. A Host Group Type is a container that may contain multiple Host Groups.
B. A Host Group Type defines the name of the Host Group.
C. They are the same thing.
D. Each Host Group must be defined by the Type of application it serves; this is the Host Group
Type.
Answer: A

Riverbed examen   299-01   299-01

NO.8 What are the two types of dashboards available within the Cascade Profiler GUI? (select 2)
A. Top Hosts
B. Top Applications
C. Public
D. Private
E. Devices and Interfaces Utilization
Answer: C,D

Riverbed examen   299-01   299-01 examen

NO.9 If unable to connect to the Cascade Shark Appliance from the Cascade Pilot console it could
be
because. (Select 2)
A. The correct communication port(s) are NOT open on the firewall between Cascade Pilot and
Cascade
Shark.
B. The Cascade Shark is placed in "passthru" mode so Cascade Pilot access is not available
C. The Cascade Shark appliance has no capture jobs configured.
D. You may be running Cascade Pilot-Personal-Edition (PE). You need the full version of Cascade
Pilot to
connect to Cascade Shark.
E. Trend/Index data is disabled on the Cascade Shark Appliance.
Answer: A,D

Riverbed   299-01   299-01

NO.10 When editing a previously configured service policy, what options become available if you
click the
'show advanced settings' checkbox? (Select 3)
A. Allows enabling/disabling the detection of dips in the metric.
B. Allows tuning of the tolerance range of the metric.
C. Allows setting of a noise floor for the metric.
D. Allows adjusting the notifications for the metric.
E. Allows enabling/disabling the detection of spikes in the metric.
Answer: A,C,E

certification Riverbed   299-01   299-01   299-01 examen

NO.11 Cascade Profiler provides identity information collected from Active Directory 2008 by
installing and
correctly configuring the 'Cascade Connector' agent software on:
A. Every DNS server in the AD environment
B. Any server in the MS domain
C. Every client desktop in the AD environment
D. Every NTP server in the MS domain
E. The Microsoft Event Collector component in the AD environment
Answer: E

Riverbed   299-01 examen   certification 299-01   certification 299-01

NO.12 If a VLAN SPAN (VLAN101) is configured and monitored by Cascade Shark, which of the
following is true? (Select 2)
A. Inter VLAN101 traffic will be monitored; Intra VLAN101 traffic will not.
B. Intra VLAN101 traffic will be monitored; Inter VLAN101 traffic will not.
C. Both inter and intra VLAN101 traffic will be monitored.
D. It is a best practice to configure the Cascade Shark monitoring port (the SPAN destination) with
'deduplication' enabled.
E. It is a best practice to configure the Cascade Shark monitoring port (the SPAN destination)
without
'deduplication' enabled.
Answer: C,D

Riverbed   299-01 examen   299-01   299-01

NO.13 What are two differences between NetFlow version 5 and NetFlow version 9 (select 2)
A. NetFlow version 5 generally support ingress flow export only; NetFlow version 9 supports both
ingress
and egress export.
B. NetFlow version 5 is used for Switches, NetFlow version 9 is used for Routers.
C. NetFlow version 9 includes information about CPU, Power-status and other router performance
characteristics; NetFlow version 5 does not.
D. NetFlow version 9 includes the ability to export the Time-To-Live (TTL); NetFlow version 5 does
not.
E. NetFlow version 9 includes the ability to export the packet latency, NetFlow version 5 does not.
Answer: A,D

certification Riverbed   certification 299-01   299-01   certification 299-01

NO.14 Link Congestion policies apply to a specific interface and can: (Select 3)
A. Warn if either inbound or outbound traffic increases abnormally
B. Warn if an application component of traffic increases abnormally
C. Warn if traffic to/from specific hosts exceeds a specific utilization level
D. Warn if the response time across a link increases abnormally
Answer: A,B,C

certification Riverbed   certification 299-01   299-01   299-01

NO.15 When changing the priority for a Layer 4 mapping on Cascade Profiler best practices indicate
that
Application Mappings should be given higher priorities based on:
A. Longest Match
B. Shortest Match
C. IP & Port
D. IP
Answer: A

certification Riverbed   certification 299-01   299-01

NO.16 When creating an analytic service, the discovery process requires a minimum of:
A. At least three days of data available.
B. At least three weeks of data available.
C. The application specialist available.
D. Some historical data and some starting point (a server, port, application).
E. A customer network diagram available.
Answer: D

Riverbed examen   299-01   299-01 examen

NO.17 What is a good way to know whether all internal IP addresses seen by the Cascade Profiler
have been grouped in a particular group type?
A. Run Automatic grouping for all group types.
B. Configure an Undefined group type with definition 0.0.0.0/0; confirm there are no entries when
you
'view members' of this 'Undefined' group'.
C. There is no way to do this and successfully capture all the IP addresses.
D. Configure an Undefined group type with definition 0.0.0.0/32.
E. Run a report by hosts and look for undefined groups.
Answer: B

Riverbed   299-01 examen   299-01   299-01 examen

NO.18 If a report table on Cascade Profiler includes the "Server Delay" column but shows no value
for
"Server Delay" in some cells, what are the possible causes? (Select 3)
A. The time span of the report does not cover any connection set-up points
B. Server delay is zero.
C. The protocol used by the application in not TCP-based.
D. Application traffic was not seen by a Cascade Sensor.
E. The server plug-in is needed to measure "Server Delay" and not functioning correctly.
Answer: A,C,D

Riverbed   299-01 examen   certification 299-01   299-01 examen   299-01 examen

NO.19 Within the Cascade Pilot GUI, filtered items are often indicated:
A. With red text.
B. With yellow text.
C. With a funnel icon.
D. With a hash-mark icon.
Answer: C

Riverbed   299-01   certification 299-01

NO.20 For DNS reverse lookup, Cascade Profiler caches as follows:
A. Cache the most recent 500 IPs.
B. Obey DNS TTLs.
C. Cascade does not cache DNS responses.
D. For 24 hours.
Answer: C

Riverbed   299-01 examen   299-01 examen

Pass4Test peut offrir nombreux de documentations aux candidats de test Riverbed 299-01, et aider les candidats à réussir le test. Les marétiaux visés au test Riverbed 299-01 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Riverbed 299-01 100%.

Certification BlackBerry de téléchargement gratuit pratique d'examen BCP-810, questions et réponses

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test BlackBerry BCP-810. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification BlackBerry BCP-810 via son guide d'étude. Est-ce que vous vous souciez de test Certification BlackBerry BCP-810? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.

Code d'Examen: BCP-810
Nom d'Examen: BlackBerry (Developing Applications for the BlackBerry Solution)
Questions et réponses: 125 Q&As

Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test BlackBerry BCP-810, la voie à la réussite de votre professionnel sera ouverte pour vous.

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test BlackBerry BCP-810 à la première fois.

BCP-810 Démo gratuit à télécharger: http://www.pass4test.fr/BCP-810.html

NO.1 Which two of the following simulators should be used to simulate the interaction between a web
application on a BlackBerry device and a web server that is behind a corporate firewall? (Choose two.)
A. BlackBerry Firewall Simulator
B. BlackBerry Screen Simulator
C. BlackBerry Device Simulator
D. BlackBerry MDS-CS Simulator
E. BlackBerry ESS Simulator
Answer: C,D

BlackBerry examen   BCP-810   certification BCP-810

NO.2 Which file type may be signed using the RIM Signature Tool and Code Signing Keys? (Choose one.)
A. COD
B. JAR
C. EXE
D. JAD
E. ALX
Answer: A

BlackBerry   certification BCP-810   BCP-810 examen   certification BCP-810

NO.3 Which of the following situations could interrupt a wireless network data connection on a BlackBerry
device? (Choose one.)
A. AWi-Fi connection is established
B. Removable media is removed
C. A Bluetooth connection is established
D. A GPS radio is activated
E. A phone call is initiated or received
Answer: E

BlackBerry examen   BCP-810   BCP-810 examen

NO.4 Which of the following file types is needed by the IDE to locate the source code for a COD
file-packaged application? (Choose one.)
A. RAPC
B. JAR
C. DEBUG
D. CSL
E. JAD
Answer: C

certification BlackBerry   BCP-810 examen   BCP-810 examen

NO.5 Which two of the following mechanisms are available to toggle content protection on the BlackBerry
device? (Choose two.)
A. IT policy
B. API call
C. BlackBerry Device setting
D. Desktop Manager setting
E. Application control
Answer: A,C

BlackBerry examen   BCP-810   BCP-810   certification BCP-810   BCP-810

NO.6 In order to write a BlackBerry device application that uses a complex custom user interface, which two
of the following IDEs could be used? (Choose two.)
A. BlackBerry Plug-in for Visual Studio
B. BlackBerry Java Development Environment
C. BlackBerry JDE Plug-in for Eclipse
D. BlackBerry Web Development Plug-in for Eclipse
E. BlackBerry Web Development Plug-in for Visual Studio
Answer: B,C

certification BlackBerry   BCP-810 examen   BCP-810

NO.7 A BlackBerry device application collects data and needs to merge it with data on a server before
pushing out an updated summary page. Which of the following collection of tools would be most
appropriate for testing this application? (Choose one.)
A. A BlackBerry MDS-CS Simulator and a real BlackBerry device
B. A database server, a proxy, and a real BlackBerry device
C. A BlackBerry ESS Simulator and a real BlackBerry device
D. A web server and a BlackBerry Device Simulator
E. A BlackBerry MDS-CS Simulator and a BlackBerry Device Simulator
Answer: E

BlackBerry examen   BCP-810   BCP-810   BCP-810 examen   BCP-810

NO.8 Application X needs to update the BlackBerry device user? address book with information from a
social networking site. It will also need to allow the user to tag images taken using the Camera application
and upload them to the site. Which two of the following application approaches will support these
requirements? (Choose two.)
A. BlackBerry Widget
B. Web application
C. BlackBerry Applet
D. BlackBerry Java application
E. BlackBerry MDS-CS
Answer: A,D

certification BlackBerry   BCP-810   BCP-810 examen   BCP-810

NO.9 A developer wants to distribute an application OTA using the BlackBerry Browser. Which
application file that provides information about the application needs to be placed on a web server?
(Choose one.)
A. JAD
B. ALX
C. COD
D. JAR
E. JDE
Answer: A

BlackBerry   BCP-810   BCP-810   BCP-810 examen   BCP-810

NO.10 Application X must receive push updates from a public server every morning. The application must
display a notification to the BlackBerry device user when the new update is received. Which two of the
following application approaches will support these requirements? (Choose two.)
A. Web application with BlackBerry Internet Service browsing
B. BlackBerry Widget with BlackBerry Internet Service Push APIs
C. BlackBerry Widget with BlackBerry Enterprise Server Push APIs
D. BlackBerry Java application with BlackBerry Internet Service Push APIs
E. BlackBerry Java application with BlackBerry Internet Service browsing
Answer: B,D

BlackBerry   BCP-810   BCP-810   BCP-810 examen

NO.11 Which method does RIM recommend for managing multiple screen displays within a BlackBerry device
application? (Choose one.)
A. Organize the screens into a tabbed panel
B. Push full sized screens to the top of a stack
C. Generate pop-up screens as required
D. Use re-sizable screens that can be collapsed and restored
E. Use a mixture of transparent and opaque screens
Answer: B

BlackBerry examen   BCP-810   certification BCP-810

NO.12 Application X must track field service agents, report their locations back to the intranet application
server, and push alerts for new jobs during the day. Given the scenario, which three of the following
components are required for application X to function properly? (Choose three.)
A. BlackBerry Enterprise Server
B. BlackBerry Internet Service
C. A GPS enabled BlackBerry device
D. BlackBerry Internet Service Push APIs
E. BlackBerry Mobile Data System Connection Service
Answer: A,C,E

BlackBerry   certification BCP-810   BCP-810 examen   BCP-810

NO.13 Which tool should be used to facilitate application test cases by simulating BlackBerry device user
interaction with the BlackBerry Device Simulator? (Choose one.)
A. BlackBerry MDS-CS Simulator
B. Javaloader
C. Controller Command
D. ESS
E. BlackBerry Desktop Manager
Answer: C

BlackBerry   BCP-810   BCP-810   BCP-810   BCP-810

NO.14 Which of the following can receive PIN messages? (Choose one.)
A. BlackBerry devices with BlackBerry Messenger
B. Any cellular phone
C. BlackBerry Enterprise Server
D. BlackBerry Internet Service
E. Any BlackBerry device
Answer: E

BlackBerry   certification BCP-810   certification BCP-810

NO.15 Which two of the following transport routes must go through the wireless network? (Choose two.)
A. BlackBerry Enterprise Server
B. WAP
C. BlackBerry Internet Service
D. Direct TCP
E. Wi-Fi
Answer: B,D

BlackBerry examen   BCP-810   BCP-810   certification BCP-810

NO.16 A technician needs a field service application that will support receipt of work orders and determine a
customer location. What are two advantages of using a Java application over a web application in this
situation? (Choose two.)
A. Java applications can access a server application over the intranet
B. Java applications run consistently faster than web applications
C. Java applications can display a BlackBerry Maps Field within the application
D. Java applications require a local client
E. Java applications can operate while out of coverage
Answer: C,E

BlackBerry   BCP-810   BCP-810

NO.17 Which three of the following debugging features are supported in BlackBerry IDEs? (Choose three.)
A. Get a variablevalueGet a variable? value
B. Change a variablevalueChange a variable? value
C. Hot code replacement
D. Arbitrary code execution
E. Creating new types
Answer: A,B,D

BlackBerry   BCP-810 examen   BCP-810 examen   BCP-810   certification BCP-810

NO.18 What would cause a signed application to become unsigned? (Choose one.)
A. The application is re-compiled
B. The signature expires
C. The application is installed too many times
D. The evoke Key button of the Signature Tool is pressed
E. The JAD and ALX files are deleted
Answer: A

BlackBerry   BCP-810   certification BCP-810   BCP-810 examen

NO.19 What are two ways to create an application UI that is consistent with the native BlackBerry UI? (Choose
two.)
A. Provide context-specific action menus on each page
B. Make use of the banner to present interactive information
C. Inherit default behaviors by using or extending existing UI components
D. Use BlackBerry UI construction tool to build the new UI from an existing template
E. Specify the font for the application screens
Answer: A,C

BlackBerry examen   BCP-810   BCP-810   BCP-810 examen

NO.20 If an application is built using BlackBerry JDE version 4.6, on which of the following BlackBerry Device
Software versions can the application be executed? (Choose one.)
A. Any BlackBerry Device Software version
B. BlackBerry Device Software 4.6 and below
C. Only BlackBerry Device Software 4.6
D. BlackBerry Device Software 4.6 and above
E. All versions above BlackBerry Device Software 4.6
Answer: D

BlackBerry   certification BCP-810   certification BCP-810   certification BCP-810

Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test BlackBerry BCP-810, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat BlackBerry BCP-810. Vous aurez une space plus grande à se développer.

BlackBerry BCP-421, de formation et d'essai

Pour vous laisser savoir mieux que la Q&A BlackBerry BCP-421 produit par Pass4Test est persuadante, le démo de Q&A BlackBerry BCP-421 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test BlackBerry BCP-421 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.

Vous aurez une assurance 100% à réussir le test BlackBerry BCP-421 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de BlackBerry après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.

L'importance de la position de Certificat BlackBerry BCP-421 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen BlackBerry BCP-421 par votre première fois.

Code d'Examen: BCP-421
Nom d'Examen: BlackBerry (Maintaining a BlackBerry Enterprise Server v5.0 in an IBM Lotus Domino Environment)
Questions et réponses: 99 Q&As

BCP-421 Démo gratuit à télécharger: http://www.pass4test.fr/BCP-421.html

NO.1 At which two levels can organizer data synchronization field mappings be modified? (Choose two.)
A. User level
B. Server level
C. Group level
D. Domain level
Answer: A,D

BlackBerry examen   certification BCP-421   certification BCP-421   BCP-421 examen   BCP-421

NO.2 Which of the following is the default port number that the BlackBerry Monitoring Service Trap Listener
will bind to? (Choose one.)Which of the following is the default port number that the BlackBerry
Monitoring Service? Trap Listener will bind to? (Choose one.)
A. 152
B. 142
C. 162
D. 125
E. 110
Answer: C

BlackBerry   BCP-421 examen   BCP-421 examen

NO.3 Which three of the following are pre-requisites for PGP encryption to be implemented in the BlackBerry
Enterprise Solution? (Choose three.)
A. Set the PGP Universal Server Address IT policy rule in the IT policy that you assign to
BlackBerry device users.
B. Instruct users to install the PGP Support Package for BlackBerry devices on their BlackBerry devices.
C. Instruct users to install the BlackBerry Security Package tool.
D. Instruct users to enroll with PGP when their BlackBerry devices prompt them to.
E. Wirelessly regenerate encryption keys from the BlackBerry device.
Answer: A,B,D

certification BlackBerry   BCP-421   BCP-421   BCP-421

NO.4 Which two of the following BlackBerry Enterprise Server versions for IBM Lotus Domino can be
upgraded to version 5.0? (Choose two.)
A. 2.2.7 SP7
B. 4.0 SP5
C. 4.0 SP7
D. 4.1 SP1
E. 4.1 SP2
F. 4.1 SP3
Answer: C,F

BlackBerry   certification BCP-421   certification BCP-421   BCP-421

NO.5 Which three of the following policies are the default application control policies? (Choose three.)
A. Default Optional
B. Standard Required
C. Default Recommended
D. Standard Optional
E. Default Disallowed
F. Standard Disallowed
Answer: B,D,F

certification BlackBerry   BCP-421   certification BCP-421   BCP-421 examen   BCP-421

NO.6 Where would a system administrator configure BlackBerry Alert Service notifications? (Choose one.)
A. BlackBerry Monitoring Service
B. BlackBerry Administration Service
C. BlackBerry Configuration Panel
D. BlackBerry MDS Integration Service Application Console
E. BlackBerry Web Desktop Manager
Answer: B

certification BlackBerry   certification BCP-421   BCP-421 examen   certification BCP-421   BCP-421

NO.7 Which three types of authentication methods are available for BlackBerry device users to log in to
BlackBerry Web Desktop Manager? (Choose three.)
A. BlackBerry Administration Service
B. Microsoft SQL Server Authentication
C. Domino Mailbox
D. Active Directory
E. IBM Lotus Notes ID
Answer: A,C,D

certification BlackBerry   BCP-421   BCP-421

NO.8 Which toolscan a system administrator use to move a BlackBerry device user between two instances
of the BlackBerry Enterprise Server? (Choose two.)
A. BESUserAdminClient
B. BlackBerry Administration Service
C. BlackBerry Server Configuration Panel
D. BlackBerry Web Desktop Manager
E. EAStatus
Answer: A,B

BlackBerry   BCP-421 examen   BCP-421 examen   BCP-421 examen

NO.9 A system administrator wants to install BlackBerry Enterprise Server software version 5.0 into an
environment. Which two versions of IBM Lotus Domino are supported for this type of installation?
(Choose two.)
A. 5
B. 6
C. 6.55
D. 7
E. 8
Answer: D,E

BlackBerry examen   BCP-421   certification BCP-421

NO.10 In the BlackBerry Monitoring Service, which three of the following formats can be used to format a
generated report? (Choose three.)
A. .txt
B. .pdf
C. .csv
D. .doc
E. .html
Answer: B,C,E

BlackBerry   BCP-421   BCP-421

NO.11 Which three of the following BlackBerry Enterprise Server components can be installed remotely or
configured to run separately from the original instance of the BlackBerry Enterprise Server? (Choose
three.)
A. BlackBerryRouter Service
B. BlackBerry Policy Service
C. BlackBerry Dispatcher Service
D. BlackBerry Attachment Service
E. BlackBerry Monitoring Service
Answer: A,D,E

certification BlackBerry   BCP-421   BCP-421 examen   certification BCP-421   BCP-421   BCP-421 examen

NO.12 Which three of the following incomplete enterprise activation states can be tracked using the BlackBerry
Administration Service? (Choose three.)
A. Ongoing
B. Pending
C. Password Set
D. Failed
E. Password Not Set
Answer: A,C,D

certification BlackBerry   BCP-421   BCP-421   BCP-421   BCP-421 examen   BCP-421

NO.13 Which three of the following BlackBerry Enterprise Server components could a system
administrator use to successfully perform a wired enterprise activation? (Choose three.)
A. BlackBerry Desktop Manager
B. BlackBerry Administration Service
C. BlackBerry Configuration Panel
D. BlackBerry Web Desktop Manager
E. BlackBerry OTASL
Answer: A,B,D

BlackBerry   certification BCP-421   BCP-421

NO.14 When performing a wireless enterprise activation, where does the activation email message come from
that is delivered to the user mailbox? (Choose one.)
A. BlackBerryMailStore Service
B. BlackBerry Dispatcher
C. Organizations firewall
D. BlackBerry Infrastructure
E. Wireless service providers network
Answer: D

BlackBerry examen   BCP-421 examen   BCP-421   BCP-421 examen

NO.15 Which three of the following steps should a system administrator perform when a BlackBerry device
user reports that address book synchronization between the BlackBerry device and the email application
is not working? (Choose three.)
A. Ensure desktop email application is configured to work with the server copy of the address book
B. Ensure the user is enabled for wireless address book synchronization
C. Ensure the user does not have any IT policies applied that would prevent wireless
synchronization
D. Ensure the user is able to browse using the BlackBerry Browser
E. Ensure the user is able to synchronize calendar appointments wirelessly
Answer: A,B,C

BlackBerry   BCP-421 examen   BCP-421   BCP-421   BCP-421

NO.16 Assuming that the BlackBerry Monitoring Service is installed separately on its own server, on which
two locations would the system administrator need to install the SNMP Service in order for the BlackBerry
Monitoring Service to receive SNMP trap data from all the BlackBerry Enterprise Server components?
(Choose two.)
A. The server that hosts the BlackBerry Monitoring Service
B. The server that hosts each remote BlackBerry Enterprise Server component
C. The server that hosts the BlackBerry Enterprise Server
D. The server that host the BlackBerry Monitoring Service and BlackBerry Enterprise Server
E. The server that hosts each remote BlackBerry component and the BlackBerry Monitoring Service
Answer: B,C

BlackBerry   certification BCP-421   certification BCP-421

NO.17 DRAG DROP
Click the Task button to open this item. Once you have completed this item and have selected Done, you
may click Next to proceed to the next item.
Answer:

NO.18 Which task must be running on a target IBM Lotus Domino server in order to support IBM Lotus Notes
links? (Choose one.)
A. BlackBerry Enterprise Server
B. BlackBerry Router
C. Adminp
D. Agent Manager
E. HTTP
Answer: E

BlackBerry examen   certification BCP-421   BCP-421 examen   certification BCP-421   BCP-421   certification BCP-421

NO.19 What credentials are required to perform a wireless enterprise activation of Wi-Fi enabled BlackBerry
devices over a Wi-Fi connection? (Choose one.)
A. Activation server address, e-mail address and password
B. E-mail address and password
C. Activation server address
D. Activation server address and password
E. Activation server address and e-mail address
Answer: A

BlackBerry   certification BCP-421   BCP-421   BCP-421 examen   BCP-421

NO.20 DRAG DROP
Click the Task button to open this item. Once you have completed this item and have selected Done, you
may click Next to proceed to the next item.
Answer:

BCP-421 est un test de BlackBerry Certification, donc réussir BCP-421 est le premier pas à mettre le pied sur la Certifiction BlackBerry. Ça peut expliquer certiainement pourquoi le test BlackBerry BCP-421 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test BCP-421. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?

Meilleur BlackBerry BCP-340 test formation guide

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test BlackBerry BCP-340, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test BlackBerry BCP-340 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat BlackBerry BCP-340 sans aucune doute.

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de BlackBerry après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.

Code d'Examen: BCP-340
Nom d'Examen: BlackBerry (Support. BB 10 Devices & BB Device Svc. in Enterprise Envir)
Questions et réponses: 100 Q&As

Vous pouvez tout d'abord télécharger le démo BlackBerry BCP-340 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A BlackBerry BCP-340. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test BlackBerry BCP-340 sans aucune doute.

Avec la version plus nouvelle de Q&A BlackBerry BCP-340, réussir le test BlackBerry BCP-340 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

BCP-340 Démo gratuit à télécharger: http://www.pass4test.fr/BCP-340.html

NO.1 A user requests an immediate password to activate a BlackBerry device but the user is not
found in the server by searching Administration Service, What should be done next?
A. Perform a quick user search to find the user
B. Add the user to the Activation Password group
C. Assign the Activation Password Software Configuration to the user
D. Create a BlackBerry enabled user with an activation password
Answer: D

certification BlackBerry   BCP-340 examen   BCP-340

NO.2 Which option best describes how to add a user to a BlackBerry Device Service (BDS) domain?
A. Login to BlackBerry Administration Console and click on "create a user" enter the user's full name
in the "Directory Display Name" field and click on "create a user with activation password"
B. Login to BlackBerry Administration Console and click on "create a user", enter the user's full
name in the "Directory Display Name" field and click on "create a user without activation password"
C. Login to BlackBerry Administration Console and click on "create a user" enter the user's email
address in the "Email Address" field and click on "create a user with generating activation password"
D. Login to BlackBerry Administration Console and click on "create a user", enter the user's email
address in the "Email Address" field and click on "create a user without activation password"
Answer: D

BlackBerry   BCP-340 examen   BCP-340   BCP-340

NO.3 A device establishes connection against the BlackBerry environment by creating an
A. HTTP connection over Wi-Fi.
B. HTTP connection over Wi-Fi VPN, or IPPP .
C. SSL connection over Wi-Fi.
D. SSL connection over Wi-Fi, VPN, or IPPP .
Answer: D

BlackBerry   BCP-340   certification BCP-340   BCP-340 examen   BCP-340 examen

NO.4 The BlackBerry Administration Service does which of the following?
A. Provides a secure connection between the device and the server
B. Maintains a connection with the BlackBerry Infrastructure
C. Communicates commands, IT policies, and profiles to the device
D. Manages the user accounts and devices
Answer: D

certification BlackBerry   certification BCP-340   BCP-340   BCP-340

NO.5 Which three components are used to contact a device?
A. BlackBerry Router, BlackBerry Dispatcher, and BlackBerry Web Desktop Manager
B. BlackBerry Router, BlackBerry Management Web Service, and BlackBerry Web Desktop Manager
C. BlackBerry Dispatcher, BlackBerry Enterprise Management Web Service, and BlackBerry Web
Desktop Manager
D. BlackBerry Dispatcher, BlackBerry Administration Service, and BlackBerry Web Desktop Manager
Answer: C

BlackBerry   certification BCP-340   BCP-340   certification BCP-340

NO.6 If users wish to perform a wired activation, which browser(s) is/are supported?
A. Windows Internet Explorer 8.0 and 9.0 (32-bit)
B. Windows Internet Explorer 8.0 and 9.0 (32-bit) or Safari 5 for Mac or later
C. Windows Internet Explorer 8.0 and 9.0 (32-bit) or Mozilla Firefox 10 or later
D. Windows Internet Explorer 8.0 and 9.0 (32-bit) or Google Chrome 12 or later
Answer: A

BlackBerry   certification BCP-340   BCP-340 examen   BCP-340 examen   BCP-340 examen

NO.7 A new user in the company would like to use BlackBerry Web Desktop Manager to activate
and manage their device. What is the first step?
A. Create a BlackBerry Enabled account for them on the server
B. Set a password for the user
C. Generate an Enterprise Activation password
D. Create a BlackBerry Web Desktop Manager password for the user
Answer: A

BlackBerry   BCP-340 examen   BCP-340

NO.8 What administrative tasks can be performed using the BlackBerry Web Desktop Manager
Option?
A. Setup an enterprise activation password, specify a new password and lock a device and assign a
new device to a user account.
B. Setup an enterprise activation password, specify a new password and lock a device, delete all
device data and deactivate a device and assign a new device to a user account.
C. Setup an enterprise activation password, specify a new password and lock a device, delete all
device data and deactivate a device, assign a new device to a user account, send a PIN message to
the administrator.
D. Setup an enterprise activation password and assign a new device to a user account.
Answer: B

BlackBerry   certification BCP-340   BCP-340 examen   BCP-340   BCP-340

NO.9 What functions are available when a device has been enrolled under the BlackBerry Protect
program?
A. View Location, Play Sound, Display a Message, Lock Device, or Wipe Device
B. View Location, Play Sound, Display a Message, Lock Device, or change BBID password
C. View Location, Play Sound, Display a Message, Rename Device, or Lock Device
D. View Location, Play Sound, Display a Message, Lock Device, or change the device PIN
Answer: A

BlackBerry   BCP-340   BCP-340 examen

NO.10 When searching for users with a specific software configuration assigned, the following
message is displayed: "The BlackBerry Administration Service cannot find the records you were
looking for. Verify the search criteria you specified and try again." What is the MOST likely cause and
corrective action to take?
A. The search modules threw an exception; log out and try the search again.
B. The search resulted in no matches; make sure search terms are valid and try again if the result
was unexpected.
C. The search was not able to connect to the configuration database to submit the search; verify
connectivity to the database server and try again.
D. The search module did not understand the criteria; make sure search terms are valid and try
again.
Answer: B

BlackBerry   BCP-340 examen   BCP-340   certification BCP-340

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test BlackBerry BCP-340 à la première fois.